相关论文: Mixing in 3-D Cavity by Moving Cavity Walls

The proposed flow in a 3-D cubic cavity is driven by its parallel walls moving in perpendicular directions to create a genuinely three-dimensional highly separated vortical flow yet having simple single-block cubical geometry of…

Flow in channels and ducts with adjoining cavities are common in natural and engineered systems. Here we report numerical and experimental results of 3D confined cavity flow, identifying critical conditions in the recirculating flow…

We use spectral analysis of Eulerian and Lagrangian dynamics to study the advective mixing in an incompressible 2D bounded cavity flow. A significant property of such a rotational flow at high Reynolds numbers is that mixing in its core is…

Direct Numerical Simulation have been carried out for a two dimensional flow in a Lid driven cavity at Reynolds number 5000 and Prandtl number 7 with water as the working fluid. Both the side walls of the enclosure are insulated(i.e.…

Mixing fluid in a container at low Reynolds number - in an inertialess environment - is not a trivial task. Reciprocating motions merely lead to cycles of mixing and unmixing, so continuous rotation, as used in many technological…

We investigate the 3D stationary flow of a weakly conducting fluid in a cubic cavity, driven by the Lorentz force created by two permanent magnets and a weak constant current. Our goal is to determine the conditions leading to efficient…

In this article, three-dimensional (3D) lid-driven flows in semicircular cavities are studied. The numerical solution of the Navier-Stokes equations modeling incompressible viscous fluid flow in cavities is obtained via a methodology…

Cavities possess self-sustaining oscillations driven by the interaction of hydrodynamic and acoustic characteristics. These oscillations have applications in fuel-air mixing, heat exchangers, and landing gears, but resonance can damage the…

In this study, a series of simulations are conducted to investigate the motion of a small cylinder in an expansion tube, focusing on two-dimensional dynamics. These simulations are performed on the FLUENT platform employing the Overset…

High resolution simulations of incompressible flows have become routine across a range of engineering applications. Despite their routine use, due to the high dimensional parameter space present for most practical applications, a…

High-fidelity large-eddy simulations of the flow around two rectangular obstacles are carried out at a Reynolds number of 10,000 based on the free-stream velocity and the obstacle height. The incoming flow is a developed turbulent boundary…

This work describes an experimental investigation on the mixing induced by a swarm of high Reynolds number air bubbles rising through a nearly homogeneous and isotropic turbulent flow. The gas volume fraction $\alpha$ and the velocity…

We combine a DEM simulation with a stochastic process to model the movement of spherical particles in a turbulent channel flow. With this model we investigate the mixing properties of two species of particles flowing through the channel. We…

Resonance processes are common phenomena in multiscale (slow-fast) systems. In the present paper we consider capture into resonance and scattering on resonance in 3-D volume-preserving slow-fast systems. We propose a general theory of those…

Turbulent flows driven by a vertically invariant body force were proven to become exactly two-dimensional above a critical rotation rate, using upper bound theory. This transition in dimensionality of a turbulent flow has key consequences…

Direct numerical simulations are performed for the steady flow normal to a circular disk at the Reynolds number of 1000. Numerical simulations are conducted with different levels of simplification procedure by reducing the azimuthal…

The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining an…

Fluidic transport in inverted T-shaped cavities with the flow entering through the top and exiting from the two bottom outlets experiences an interesting phenomenon that causes particles having density lower than that of the fluid medium to…

We study the convective patterns that arise in a nearly semi-cylindrical cavity fed in with hot fluid at the upper boundary, bounded by a cold, porous semi-circular boundary at the bottom, and infinitely extended in the third direction.…

Vertical convection is the fluid motion that is induced by the heating and cooling of two opposed vertical boundaries of a rectangular cavity (see e.g. Wang et al. 2021). We consider the linear stability of the steady two-dimensional flow…