相关论文: Understanding the Nonlinear Behavior and Frequency…
With the increased penetration of renewable energy and reduced proportion of synchronous generators, the low-inertia characteristics of todays power system become prominent, and the transient stability issue of grid following converter…
VSG control has emerged as a crucial technology for integrating renewable energy sources. However, renewable energy have limited tolerance to overcurrent, necessitating the implementation of current limiting (CL)strategies to mitigate the…
Virtual inertia is an effective control approach to attenuate sudden voltage changes during transient events in low-inertia DC grids. While methods have been proposed to implement virtual inertia, its impact on DC grid stability in the…
Grid-forming voltage source converter (GF-VSC) has been identified as the key technology for the operation of future converter-dominated power systems. Among many other issues, transient stability of this type of power systems remains an…
Having sufficient grid-forming sources is one of the necessary conditions to guarantee the stability in a power system hosting a very large share of inverter-based generation. The grid-forming function has been historically fulfilled by…
The complexity arising in AC microgrids from multiple interacting distributed generation units (DGUs) with intermittent supply behavior requires local voltage-source inverters (VSIs) to be controlled in a distributed or decentralized manner…
This paper investigates power swing characteristics of grid-forming voltage source converter (GFM-VSC) systems considering the current limitation mode in both non-inertial and inertial GFM-VSC systems. Following grid faults, non-inertial…
This paper addresses stability issues of DC networks with constant power loads (CPL). Common DC networks, such as automotive electrical systems and DC microgrids, typically have a step-up/down converter connected in one side to the main bus…
Grid forming control applied to power converters that interface storage or renewable generation to the power grid, has been identified as a potential solution to facilitate a substantial share of converter-based renewable generation in the…
Thermostatically controlled loads (TCLs) can provide ancillary services to the power network by aiding existing frequency control mechanisms. TCLs are, however, characterized by an intrinsic limit cycle behavior which raises the risk that…
Large-scale integration of inverter-based resources into power grids worldwide is challenging their stability and security. This paper takes a closer look at synchronous condensers as a solution to mitigate stability challenges caused by…
The significant electrical distance between wind power collection points and the main grid poses challenges for weak grid-connected wind power systems. A new type of voltage oscillation phenomenon induced by repeated low voltage…
This paper introduces the concept of Transient Slack Capability (TSC), a set of three necessary device-level conditions to ensure stability under sustained power perturbations. TSC states that a device must (1) possess sufficient stored…
Voltage regulation under conventional grid-forming controllers is tightly coupled to power sharing and dc-link dynamics. Consequently, its tracking accuracy deteriorates during grid faults, sudden power sharing changes, or dc-bus voltage…
Small-signal instability of grid-connected power converters may arise when the converters use a phase-locked loop (PLL) to synchronize with a weak grid. Commonly, this stability problem (referred as PLL-synchronization stability in this…
In this paper, we analytically study the transient stability of grid-connected converters with grid-forming complex droop control, also known as dispatchable virtual oscillator control. We prove theoretically that complex droop control, as…
In the past few years there has been a significant rise in the short-circuit current levels in transmission and distribution networks, it due to the increasing demands on power and the addition of sources of distributed generations. It…
Unified virtual oscillator controller (uVOC) inherits the rigorous analytical foundation offered by oscillator based grid-forming (GFM) controllers and enables fast over-current limiting and fault ride-through (FRT). Control design for…
The renewable energy is connected to the power grid through power electronic converters, which are lack of make the inertia of synchronous generator/machine (SM) be lost. The increasing penetration of renewable energy in power system…
The energy transition introduces more volatile energy sources into the power grids. In this context, power transfer between different synchronous areas through High Voltage Direct Current (HVDC) links becomes increasingly important. Such…