相关论文: Error scaling of large-eddy simulation in the oute…
Wall-bounded turbulence is relevant for many engineering and natural science applications, yet there are still aspects of its underlying physics that are not fully understood, particularly at high Reynolds numbers. In this study, we…
The effect of grid resolution on large eddy simulation (LES) of wall-bounded turbulent flow is investigated. A channel flow simulation campaign involving systematic variation of the streamwise ($\Delta x$) and spanwise ($\Delta z$) grid…
A new approach to turbulence simulation, based on a combination of large-eddy simulation (LES) for the whole flow and an array of non-space-filling quasi-direct numerical simulations (QDNS), which sample the response of near-wall turbulence…
The problem of an accurate Eulerian-Lagrangian modeling of inertial particle dispersion in Large Eddy Simulation (LES) of turbulent wall-bounded flows is addressed. We run Direct Numerical Simulation (DNS) for turbulent channel flow at…
The logarithmic law for the mean velocity in turbulent boundary layers has long provided a valuable and robust reference for comparison with theories, models, and large-eddy simulations (LES) of wall-bounded turbulence. More recently,…
Wall-modeled large-eddy simulation (WMLES) is widely recognized as a useful method for simulation of turbulent flows at high Reynolds numbers. Nevertheless, a continual issue in different wall models is the shift of the mean velocity…
Wall modelling in large-eddy simulation (LES) is necessary to overcome the prohibitive near-wall resolution requirements in high-Reynolds-number turbulent flows. Most existing wall models rely on assumptions about the state of the boundary…
The study presents wall-modeled large-eddy simulations (LES) characterizing the flow features of a neutral atmospheric boundary layer over two urban-like roughness geometries: an array of three-dimensional square prisms and the…
Very recently, a defect model which depicts the growth tendency of the near-wall peak of the streamwise turbulence intensity has been developed (Chen $\&$ Sreenivasan, J. Fluid Mech. (2021), vol.908, R3). Based on the finiteness of the…
A promising and cost-effective method for numerical simulation of high Re wall-bounded flows is wall-modeled large-eddy simulation. Most wall models are formulated from the Reynolds-averaged Navier-Stokes equations (RANS). These RANS-based…
This article proposes a Reynolds number scaling of the required grid points to perform wall-modeled LES of turbulent flows encountering separation off a solid surface. Based on comparisons between the various time scales in a…
In this study, we conduct a parametric analysis to evaluate the sensitivities of wall-modeled large-eddy simulation (LES) with respect to subgrid-scale (SGS) models, mesh resolution, wall boundary conditions and mesh anisotropy. While such…
We study the numerical errors of large-eddy simulation (LES) in isotropic and wall-bounded turbulence. A direct-numerical-simulation (DNS)-aided LES formulation, where the subgrid-scale (SGS) term of the LES is computed by using filtered…
While direct numerical simulations (DNS) are the most accurate method for studying turbulence, their large computational cost restricts their use to idealized configurations and to Reynolds numbers well below those found in practical…
We present results of implicit large eddy simulation (LES) and different Reynolds-averaged Navier-Stokes (RANS) models of the MTU 161 low pressure turbine at an exit Reynolds number of 90,000 and exit Mach number of 0.6. The LES results are…
We investigate statistics of large-scale structures from large-eddy simulation (LES) of turbulent channel flow at friction Reynolds numbers $Re_\tau = 2 {\rm k}$ and $200 {\rm k}$. To properly capture the behaviour of large-scale…
Non-equilibrium wall turbulence with mean-flow three-dimensionality is ubiquitous in geophysical and engineering flows. Under these conditions, turbulence may experience a counter-intuitive depletion of the turbulent stresses, which has…
A large eddy simulation (LES) with an extended Smagorinsky model has been carried to investigate numerically the fully developed turbulent flow of a shear thinning fluid (n=0.75) in a stationary pipe at a simulation's Reynolds number equals…
We conduct wall-modeled LES (WMLES) of a pressure-driven three-dimensional turbulent boundary layer (3DTBL) developing on the floor of a bent square duct to investigate the predictive capability of three widely used wall models, namely, a…
In wall-modeled large-eddy simulations (WMLES), the near-wall model plays a significant role in predicting the skin friction, although the majority of the boundary layer is resolved by the outer large-eddy simulation (LES) solver. In this…