相关论文: Effect of Transducer Positioning in Active Noise C…

Active Noise Control (ANC) is a widely adopted technology for reducing environmental noise across various scenarios. This paper focuses on enhancing noise reduction performance, particularly through the refinement of signal quality fed into…

Active noise control (ANC) is an effective way for reducing the noise level in electroacoustic or electromechanical systems. Since its first introduction in 1936, this approach has been greatly developed. This paper focuses on discussing…

A multichannel active noise control (ANC) method with exterior radiation suppression is proposed. When applying ANC in a three-dimensional space by using multiple microphones and loudspeakers, the loudspeaker output can amplify noise…

Active noise control (ANC) over a sizeable space requires a large number of reference and error microphones to satisfy the spatial Nyquist sampling criterion, which limits the feasibility of practical realization of such systems. This paper…

Active noise control (ANC) systems are commonly designed to achieve maximal sound reduction regardless of the incident direction of the sound. When desired sound is present, the state-of-the-art methods add a separate system to reconstruct…

Active Noise Cancellation (ANC) algorithms aim to suppress unwanted acoustic disturbances by generating anti-noise signals that destructively interfere with the original noise in real time. Although recent deep learning-based ANC algorithms…

This paper proposes a deep cerebellar model articulation controller (DCMAC) for adaptive noise cancellation (ANC). We expand upon the conventional CMAC by stacking sin-gle-layer CMAC models into multiple layers to form a DCMAC model and…

Active noise control (ANC) has become popular for reducing noise and thus enhancing user comfort in headphones. While feedback control offers an effective way to implement ANC, it is restricted by uncertainty of the controlled system that…

A spatial active noise control (ANC) method based on the interpolation of a sound field from reference microphone signals is proposed. In most current spatial ANC methods, a sufficient number of error microphones are required to reduce…

This paper presents some recent algorithms developed by the authors for real-time adaptive active noise (AANC) control systems. These algorithms address some of the common challenges faced by AANC systems, such as speaker saturation, system…

Active headrests can reduce low-frequency noise around ears based on active noise control (ANC) system. Both the control system using fixed control filters and the remote microphone-based adaptive control system provide good noise reduction…

Smart glasses are becoming an increasingly prevalent wearable platform, with audio as a key interaction modality. However, hearing in noisy environments remains challenging because smart glasses are equipped with open-ear speakers that do…

One enduring challenge for controlling high frequency sound in local active noise control (ANC) systems is to obtain the acoustic signal at the specific location to be controlled. In some applications such as in ANC headrest systems, it is…

Traditional Active Noise Control (ANC) systems are mostly based on FxLMS algorithms, but such algorithms rely on linear assumptions and are often limited in handling broadband non-stationary noise or nonlinear acoustic paths. Not only that,…

Reviving natural ventilation (NV) for urban sustainability presents challenges for indoor acoustic comfort. Active control and interference-based noise mitigation strategies, such as the use of loudspeakers, offer potential solutions to…

The European programs for development of supersonic air-flights involve new studies on the human perception of sonic boom. Because this noise includes high-level components at very low-frequency, the usual psycho-acoustic tests with…

Most of the literature focuses on the development of the linear active noise control (ANC) techniques. However, ANC systems might have to deal with some nonlinear components and the performance of linear ANC techniques may degrade in this…

In theory, active control could be used to reduce the unwanted noise reflections from surfaces such as a submarine hull or the walls of an anechoic room. In the recent years, a real-time algorithm has been developed to this effect at the…

Filtered-X LMS (FxLMS) is commonly used for active noise control (ANC), wherein the soundfield is minimized at a desired location. Given prior knowledge of the spatial region of the noise or control sources, we could improve FxLMS by…

Since Paul Leug's 1933 patent application for a system for the active control of sound, the field of active noise control (ANC) has not flourished until the advent of digital signal processors forty years ago. Early theoretical advancements…