相关论文: An electronic ratchet is required in nanostructure…
A semiconductor structure consisting of two coupled quantum wells embedded into the intrinsic region of a {\it p-i-n} junction is proposed to be implemented as an intermediate band solar cell with ratchet state. The localized conduction…
Intermediate Band Solar Cell is an advanced concept for solar energy conversion in which two low-energy photons can promote an electron to the conduction band through a so-called intermediate band. To limit recombination and preserve the…
Many advanced solar cell concepts propose surpassing the Shockley Queisser (SQ) limit by introducing multiple quasi-Fermi level separations that are arranged in series and/or in parallel. Exceeding the SQ limit with any parallel arrangement…
The intermediate band solar cell (IBSC) and quantum ratchet solar cell (QRSC) have the potential to surpass the efficiency of standard single-junction solar cells by allowing sub-gap photon absorption through states deep inside the band…
The spin-split indirect bandgap in hybrid-halide perovskites provides a momentum-space realisation of a photon-ratchet intermediate band. Excited electrons thermalise to recombination-protected Rashba pockets offset in momentum space,…
The Shockley-Queisser limit describes the maximum solar energy conversion efficiency achievable for a particular material and is the standard by which new photovoltaic technologies are compared. This limit is based on the principle of…
Nanostructures, especially of silicon, are of paramount importance for new generation solar cell applications. The key material requirements for solar cells are good electrical conductivity, confinement of excitons, and a tunable band-gap…
Photovoltaic materials are recognized for their potential as sustainable energy sources that enable the conversion between light and electrical energy. However, solar cells have been unable to surpass the theoretical limit of 32%, known as…
We employ a detailed balance approach to model a single-junction solar cell with a realistic narrow-band, non-unity-quantum-yield upconverter. As upconverter bandwidths are increased from 0 to 0.5 eV, maximum cell efficiencies increase from…
The theoretical maximum efficiency of a solar cell is typically characterized by a detailed balance of optical absorption and emission for a semiconductor in the limit of unity radiative efficiency and an ideal step-function response for…
Taking into account the temperature gradients in solar cells, it is shown that their efficiency can be increased beyond the Shockley-Queisser limit (J. Appl. Phys. 32 (1961) 510). The driving force for this gain is the temperature gradient…
The Shockley-Queisser limit is one of the most fundamental results in the field of photovoltaics. Based on the principle of detailed balance, it defines an upper limit for a single junction solar cell that uses an absorber material with a…
Recombination through quantum dots (QDs) is a major factor that limits efficiency of QD intermediate-band (IB) solar cells. Our proposal for a new IB solar cell based on type-II GaSb QDs located outside the depletion region of a GaAs…
In this work we propose a ratchet effect which provides a general means of performing clocked logic operations on discrete particles, such as single electrons or vortices. The states are propagated through the device by the use of an…
We argue that alternating-layer structures of lattice mismatched or misaligned (twisted) atomically-thin layers should be expected to be more efficient absorbers of the broad-spectrum of solar radiation than the bulk material of each…
Many advanced concepts for high-efficiency photovoltaic devices exploit the peculiar optoelectronic properties of semiconductor nanostructures such as quantum wells, wires and dots. While the optics of such devices is only modestly affected…
Using the non equilibrium Green functions formalism we propose a study of the electronic excitation and collection in nano-structured intermediate-band solar cell. We demonstrate that a thin tunnel barrier between the nano-objects and the…
Several nanoelectronic devices have been already proved. However, no architecture which makes use of them provides a feasible opportunity to build medium/large systems. Nanoarchitecture proposals only solve a small part of the problems…
There remains wide interest in solar cells being made using inexpensive materials and simple device manufacturing techniques to harvest ever-increasing amounts of energy. New semiconductor materials and new quantum nanostructures are…
The Shockley-Queisser (SQ) limit provides a convenient metric for predicting light-to-electricity conversion efficiency of a solar cell based on the band gap of the light-absorbing layer. In reality, few materials approach this radiative…