相关论文: Feedforward and feedback control of locked mode ph…
A two channel oblique electron cyclotron emission (ECE) radiometer was installed on the DIII-D tokamak and interfaced to 4 gyrotrons. Oblique ECE was used to toroidally and radially localize rotating magnetic islands and so assist their…
The most promising technique for the control of neoclassical tearing modes in tokamak experiments is the compensation of the missing bootstrap current with electron-cyclotron current drive. In this frame, the dynamics of magnetic islands…
Non-rotating (`locked') magnetic islands often lead to complete losses of confinement in tokamak plasmas, called major disruptions. Here locked islands were suppressed for the first time, by a combination of applied three-dimensional…
Tearing modes in tokamaks typically rotate while small and then lock at a fixed location when larger. Research on present-day devices has focused almost exclusively on stabilisation of rotating modes, as it has been considered imperative to…
When electron cyclotron (EC) driven current is first applied to the inside of a magnetic island, the current spreads throughout the island and after a short period achieves a steady level. Using a two equation fluid model for the EC current…
Many disruptions are caused by resistive wall tearing modes (RWTM). A database of DIII-D locked mode disruptions provides two main disruption criteria, which are shown to be signatures of RWTMs. The first is that the q = 2 rational surface…
This work presents the first analysis of the disruptive locked mode (LM) triggered by the dynamics of a confinement change. It shows that, under certain conditions, the LM threshold during the transient is significantly lower than expected…
A gyrokinetic simulation of the influence of electron cyclotron current drive and ion kinetic effect on the m/n=2/1 tearing mode (TM) instabilities is presented in HL-2A and DIII-D tokamak configurations. The TM evolution is calculated with…
Feedback stabilization of magnetohydrodynamic (MHD) modes is studied in a cylindrical model for a tokamak with resistivity, viscosity and toroidal rotation. The control is based on a linear combination of the normal and tangential…
Magnetic islands play a crucial role in regulating plasma confinement in tokamaks by interacting with micro-instabilities, such as the ion temperature gradient (ITG) mode. This work presents a detailed investigation of the effects of static…
It is shown that static error fields (EFs) can severely limit the maximum rotation frequency achievable in mode entrainment by applied rotating fields. It is also shown that the rotation non-uniformities caused by an EF can be used to…
Currents driven by rf (radio frequency) waves in the interior of magnetic islands can stabilize deleterious tearing modes in tokamaks. Present analyses of stabilization assume that the local electron acceleration is unaffected by the…
A detailed understanding of island seeding is crucial to avoid (N)TMs and their negative consequences like confinement degradation and disruptions. In the present work, we investigate the growth of 2/1 islands in response to magnetic…
Non-axisymmetric stationary magnetic perturbations lead to the formation of homoclinic tangles near the divertor magnetic saddle in tokamak discharges. These tangles intersect the divertor plates in static helical structures that delimit…
Floating offshore wind turbines allow wind energy to be harvested in deep waters. However, additional dynamics and structural loads may result when the floating platform is being excited by wind and waves. In this work, the conventional…
The tearing mode instability and the associated magnetic islands can lead to a degradation of tokamak plasma performance and eventually to a disruption. A crucial issue for the extension of advanced tokamak scenarios to long pulse operation…
By analyzing large quantities of discharges in the unfavorable ion $ \vec B\times \nabla B $ drift direction, the I-mode operation has been confirmed in EAST tokamak. During the L-mode to I-mode transition, the energy confinement has a…
Disruptions are a serious problem in tokamaks, in which thermal and magnetic energy confinement is lost. This paper uses data from the DIII-D experiment, theory, and simulations to demonstrate that resistive wall tearing modes (RWTM)…
In order to contribute to the understanding of runaway electron generation mechanisms during tokamak disruptions, a test particle tracker is introduced in the JOREK 3D non-linear MHD code, able to compute both full and guiding center…
The physical processes taking place at the edge region are crucial for the operation of tokamaks as they govern the interaction of hot plasma with the vessel walls. Numerical modeling of the edge with state-of-the-art codes attempts to…