相关论文: Selective etching of PDMS: etching as positive res…
The conductivity and stability of specially treated PEDOT:PSS thin films are investigated. Based on the proposed treatment method, ITO-free PTB7:PC71BM organic solar cells are fabricated and the electrical properties of the cells are…
The observation that the thermal conductivity of single-crystalline silicon nanowires with diameter on the length scale of 25 nm is lower than that of bulk material by two orders of magnitude has attracted the interest onto silicon as a…
In this work, the polymerization of limonene oxide (LO) has been optimized at room temperature with two different aluminium-based catalysts [AlMeX{2,6-(CHPh$_2$)$_2$-4-tBu-C$_6$H$_2$O}] (X = Me (1), Cl (2)). A fully bio-based ether,…
Simultaneously optimizing performances, processability and fabrication cost of organic electronic materials is the continual source of compromise hindering the development of disruptive applications. In this work, we identified a strategy…
3D printing technology offers the possibility of producing synthetic samples with accurately defined microstructures. As indicated by effective medium theory (EMT), the shapes, orientations, and sizes of voids significantly affect the…
Precise control of ion energy distribution functions (IEDF) is crucial for selectivity as well as control over sputter rate and substrate damage in nanoscale plasma processes. In this work, a low frequency (100 kHz) tailored…
Electrospinning is a modern alternative to the expanded method for producing porous polytetrafluoroethylene membranes. High strength and relative elongation, as well as the ability to maintain these properties for a long time when exposed…
We demonstrate that the surface of the honeycomb lattice iridate Na$_2$IrO$_3$ is extremely tunable by plasma etching. We have succeeded in turning the surface of Na$_2$IrO$_3$ metallic by Ar plasma etching which leads to the removal of Na…
Advanced three-dimensional manufacturing techniques are triggering new paradigms in the way we design and produce sophisticated parts on demand. Yet, to fully unravel its potential, a few limitations have to be overcome, one of them being…
Photoactive materials hold great promise for a variety of applications. We present a finite element model of light-controlled flexible magnetic composite structure composed of 33.3% Chromium dioxide (CrO2) and 66.7% Polydimethylsiloxane…
Additive manufacturing can realize almost any designed geometry, enabling the fabrication of innovative products for advanced applications. Local electrochemical plating is a powerful approach for additive manufacturing of metal…
Resistive solid state sensors are widely used in multiple applications, including molecular and gas detection. Absorption or intercalation of the target species varies the lattice parameters and an effective thickness of thin films, which…
Emerging contaminants (ECs) have come out as the latest class of environmental contaminants, which are highly recalcitrant and toxic in nature. Currently, no suitable rectification methods are available against the ECs, resulting in a…
Hard-magnetic soft active materials (hmSAMs) have attracted a great amount of research interests due to their fast-transforming, untethered control, as well as excellent programmability. However, the current direct-ink-write (DIW)…
Porous single layer molybdenum disulfide (MoS$_2$) is a promising material for applications such as DNA sequencing and water desalination. In this work, we introduce irradiation with highly charged ions (HCIs) as a new technique to…
The shapes of liquid polystyrene (PS) droplets on viscoelastic polydimethylsiloxane (PDMS) substrates are investigated experimentally using atomic force microscopy for a range of droplet sizes and substrate elasticities. These shapes, which…
As a basic mechanical parameter, Poisson's ratio ({\nu}) measures the mechanical responses of solids against external loads. In rare cases, materials have a negative Poisson's ratio (NPR), and present an interesting auxetic effect. That is,…
There are a few methodologies to monitoring the Porous Silicon (PS) formation in-situ. One of these methodologies is photoacoustic. Previous works that reported the use of photoacoustic to study the PS formation do not provide the physical…
In recent years, new flexible functional materials have attracted increasing interest, but there is a lack of the designing mechanisms of flexibility design with superstructures. In traditional engineering mechanics, the maximum bending…
Chemical looping methane partial oxidation provides an energy and cost effective route for methane utilization. However, there is considerable CO2 co-production in state-of-the-art chemical looping systems, rendering a decreased…