相关论文: Embroidered Antenna Characterization for Passive U…

We present a technique for detecting ultra-high frequency (UHF) radio fields using a three-photon Rydberg excitation scheme in a continuously laser cooled sample of Rb-87 atoms. By measuring Autler-Townes splitting, we demonstrate resonant…

Distributed space antennas using electromagnetic formation flight (EMFF) are a promising architecture for large-aperture, long-life space communication systems. Their feasible aperture, however, is governed by coupled constraints on antenna…

Electromagnetic decoupling among a close-fitting or high-density transceiver RF array elements is required to maintain the integrity of the magnetic flux density from individual channel for enhanced performance in detection sensitivity and…

In this paper, we exploit the metagrating paradigm to achieve coherent control of absorption and reflection in a two-port device. Employing graphene ribbon as a tunable element allows us to, for the first time, realize a reconfigurable…

Ambient backscatter communication is an emerging and promising low-energy technology for the Internet of Things. In such a system, a tag sends a binary message to a reader by backscattering a radio frequency signal generated by an ambient…

This project presents the design, simulation, and fabrication of a compact dual-band patch antenna using a stacked structure, targeting 2.25 to 2.35 GHz and 5.6 to 5.8 GHz ISM bands. A stacked configuration was chosen over a slotted design…

Radio frequencies in the HF and VHF (3 MHz to 300 MHz) bands are challenging for Rydberg atom-based detection schemes, as resonant detection requires exciting the atoms to extremely high energy states. We demonstrate a method for detecting…

Antenna technology is at the basis of ubiquitous wireless communication systems and sensors. Radiation is typically sustained by conduction currents flowing around resonant metallic objects that are optimized to enhance efficiency and…

We present a method, referred to as Deep Harmonic Finesse (DHF), for separation of non-stationary quasi-periodic signals when limited data is available. The problem frequently arises in wearable systems in which, a combination of…

Maximizing the tag reading rate of a reader is one of the most important design objectives in RFID systems as the tag reading rate is inversely proportional to the time required to completely read all the tags within the reader's radio…

In this paper, we introduce 2DR, a single RFID tag which can seamlessly sense two-dimensional human touch using off-the-shelf RFID readers. Instead of using a two-dimensional tag array to sense human finger touch on a surface, 2DR only uses…

In Internet of Things (IoT), radio frequency fingerprints (RFF) technology has been widely used for passive security authentication to identify the special emitter. However, few works took advantage of independent oscillator distortions at…

The development of wearable devices for terahertz (THz) integrated sensing and communication (ISAC) is pivotal for forthcoming 6G Internet of Things (IoT) and wearable optoelectronics. However, existing THz system suffers from bulkiness,…

We report on the modeling and experimental characterization of Si CMOS detectors of terahertz radiation based on antenna-coupled field-effect transistors (TeraFETs). The detectors are manufactured using TSMC's 65-nm technology. We apply two…

We present a real-time THz imaging method using a commercial fiber coupled photo conductive antenna as the THz source and an uncooled microbolometer camera for detection. Compared to other THz imaging setups, this concept is very adaptable…

Superconducting Quantum Interference Filters (SQIF) are promising devices for Radio- Frequency (RF) detection combining low noise, high sensitivity, large dynamic range and wide-band capabilities. Impressive progress have been made recently…

A radio-frequency (rf) matching circuit with an in situ tunable varactor diode used for rf reflectometry measurements in semiconductor nanostructures is investigated and used to optimize the sample-specific chip design. The samples are…

Adversarial patches have emerged as a popular privacy-preserving approach for resisting AI-driven surveillance systems. However, their conspicuous appearance makes them difficult to deploy in real-world scenarios. In this paper, we propose…

In this paper, we propose a new type of array antenna, termed the Random Frequency Diverse Array (RFDA), for an uncoupled indication of target direction and range with low system complexity. In RFDA, each array element has a narrow…

The Internet of Things (IoT) is a distributed system of physical objects that requires the seamless integration of hardware (e.g., sensors, actuators, electronics) and network communications in order to collect and exchange data. IoT smart…