相关论文: Beam tuning and bunch length measurement in the bu…
The ARES linac at DESY aims to generate and characterize ultrashort electron bunches (fs to sub-fs duration) with high momentum and arrival time stability for the purpose of applications related to accelerator R&D, e.g. development of…
We presented a novel concept of longitudinal bunch train compression capable of manipulating relativistic electron beam in range of hundreds of meters. This concept has the potential to compress the electron beam generated by conditional…
We presented a novel concept of longitudinal bunch train compression capable of manipulating relativistic electron beam in range of hundreds of meters. This concept has the potential to compress the electron beam with a high ratio and raise…
Commissioning at the SCRF accelerator at the Fermilab Accelerator Science and Technology (FAST) Facility has included the implementation of a versatile bunch-length monitor located after the 4-dipole chicane bunch compressor for electron…
With electron beam durations down to femtoseconds and sub-femtoseconds achievable in current state-of-the-art accelerators, longitudinal bunch length diagnostics with resolution at the attosecond level are required. In this paper, we…
In a linac driven Free Electron Laser (FEL), the shot-to-shot and non-invasive monitoring of the electron bunch length is normally ensured by Bunch Compressor Monitors (BCMs). The bunch-length dependent signal of a BCM results from the…
Recirculating energy recovery linacs are a promising technology for delivering high power particle beams ($\sim$GW) while only requiring low power ($\sim$kW) RF sources. This is achieved by decelerating the used bunches and using the energy…
Short bunch proton beams are of great significance for the applications of white neutron beams and muon beams. The accelerator complex of China Spallation Neutron Source (CSNS) was designed to support the applications mainly based on…
Many front-end applications of electron linear accelerators rely on the production of temporally-compressed bunches. The shortening of electron bunches is often realized with magnetic bunch compressors located in high-energy sections of…
Longitudinal bunch profile monitoring is a crucial diagnostic requirement in most accelerator facilities. This is particularly true in modern free-electron lasers and novel acceleration schemes, where bunch lengths are often <100 fs and…
The Fermilab Linac delivers 400MeV, 25mA H$^-$; beam. The longitudinal bunch parameters are reconstructed using a Bunch Shape Monitor (BSM) installed in the middle of the Linac. For that, the bunch length is measured as a function of the…
In the past decade, the bunch lengths of electrons in accelerators have decreased dramatically to the range of a few picoseconds \cite{Uesaka94,Trotz97}. Measurement of the length as well as the longitudinal profile of these short bunches…
Generation of ultrashort X-ray pulses in a free-electron laser relies on high-density electron bunches with a precisely adjusted current and energy distribution. To this end, robust and flexible electron bunch manipulation techniques are…
We present the design of a high repetition rate MeV energy ultrafast electron diffraction instrument based on a DC photoelectron gun and an SRF linac with multiple independently controlled accelerating and bunching cavities. The design is…
The current article deals with analytical bunch compression studies for FLUTE whose results are compared to simulations. FLUTE is a linac-based electron accelerator with a design energy of approximately 40 MeV currently being constructed at…
We have considered the possibility of using coherent Smith-Purcell radiation for the single-shot determination of the longitudinal profile of 50 fs (FWHM) long electron bunches. This length is typical for the bunches currently produced by…
In this paper, we use an envelope equation-based approach to obtain analytical scaling laws for the shortest pulse length achievable using radiofrequency (RF) based bunch compression. The derived formulas elucidate the dependencies on the…
The A0 Photoinjector at Fermilab can produce high charge (10-14 nC) electron bunches of low emittance (20 pi mm-mrad for 12 nC). We have undertaken a study of the optimal compression conditions. Off-crest acceleration in the 9-cell capture…
Charged particle bunch length detection is one of the most challenging measurements in particle and accelerator physics, especially when the bunch length reduces below tens of femtoseconds. Since these measurements are most critical in high…
A magnetic bunch compressor has been designed and is being commissioned for the APS linac to provide higher peak current for the LEUTL FEL. Of primary concern is control of emittance growth due to coherent synchrotron radiation (CSR). In…