相关论文: Microstructure of Conductive Ceramics Al2O3.MnO2.S…
Additive manufacturing holds more potential to enable the development of ceramic-based components. Ceramics offer high resistance to heat, high fracture toughness, and are extremely corrosion resistant. Thus, ceramics are widely used in…
Silicate ceramics are of considerable promise as high frequency dielectrics in emerging millimetre wave applications including high bandwidth wireless communication and sensing. In this review, we show how high quality factors and low,…
The potential utilization of two-stage sintering for the production of highly dense and pure nickel diniobate (Ni4Nb2O9) ceramics with low firing temperature was demonstrated. Effects of designed sintering conditions on phase formation,…
Polycrystalline LiMnBO3 is a promising cathode material for Li-ion batteries. In this work, we investigated the thermal, structural and electrical properties of glassy and nanocrystallized materials having the same chemical composition. The…
This work summarizes recent progress on the thermal transport properties of three-dimensional (3D) nanostructures, with an emphasis on experimental results. Depending on the applications, different 3D nanostructures can be prepared or…
The discovery of superconductivity in the quantum critical Kondo-lattice system YbRh2Si2 at an extremely low temperature of 2 mK has inspired efforts to perform high-resolution electrical resistivity measurements down to this temperature…
The reduction of the thermal conductivity in nanostructures opens up the possibility of exploiting for thermoelectric purposes also materials such as silicon, which are cheap, available and sustainable but with a high thermal conductivity…
The mechanical behavior of a Mo-TiC30 vol.% ceramic-metal composite was investigated over a large temperature range (25^{\circ}C to 700^{\circ}C). High-energy X-ray tomography was used to reveal the percolation of the hard titanium carbide…
The effect of sintering regimes on the density, microstructure parameters, and mechanical properties of Al2O3 and Al2O3 + 0.25%MgO ceramics has been investigated. The ceramics were sintered in three regimes: Regime I - heating at a constant…
Among all the properties required for the design of the next generation of PCM (density, heat capacity, thermal expansion, latent energy, volume change upon melting, corrosion rate, etc.) the thermal transport properties are by far the…
If confocal microscopy is an ubiquitous tool in life science, its applications in chemistry and materials science are still, in comparison, very limited. Of particular interest in these domains is the use of confocal microscopy to…
Nanostructured silicon is a promising material for thermoelectric conversion, because the thermal conductivity in silicon nanostructures can be strongly reduced with respect to that of bulk materials. We present thermal conductivity…
Reducing the formation temperature of single-phase multioxides is one of the classic challenges in ceramic processing, including wet-chemical synthesis routes. Toward pursuing this aim for diopside (MgCaSi2O6), the merit of different…
Controlling thermal transport at the nanoscale is vital for many applications. Previously, it has been shown that this control can be achieved with periodically nanostructured two-dimensional phononic crystals, for the case of suspended…
Controllable geometric manipulation via micromachining techniques provides a promising tool for enhancing useful topological electrical responses relevant to future applications such as quantum information science. Here we present…
In the last two decades, a nanostructuring paradigm has been successfully applied in a wide range of thermoelectric materials, resulting in significant reduction in thermal conductivity and superior thermoelectric performance. These…
Thermal conductivity of a model glass-forming system in the liquid and glass states is studied using extensive numerical simulations. We show that near the glass transition temperture, where the structural relaxation time becomes very long,…
A novel microfabricated, all-electrical measurement platform is presented for a direct, accurate and rapid determination of the thermal conductivity and diffusivity of liquid and solid materials. The measurement approach is based on the…
Intermetallic clathrates are candidate materials for thermoelectric applications above room temperature. Here we explore whether their intrinsically low lattice thermal conductivities can be further reduced by nanostructuring and whether…
We have performed optical microscopy, micro-photoelectron spectroscopy, and micro-Raman scattering measurements on Y$_{0.63}$Ca$_{0.37}$TiO$_3$ single crystals in order to clarify the interplay between the microstructure and the temperature…