相关论文: Evidence of new twinning modes in magnesium questi…
Contraction twinning in magnesium alloys leads to new grains that are misoriented from the parent grain by a rotation of 56 deg around the a-axis. The classical theory of deformation twinning does not precise the atomic displacements and…
A crystallographic displacive model is proposed for the extension twins in magnesium. It is based on a hard-sphere assumption previously used for martensitic transformations. The atomic displacements are established, and the homogeneous…
Deformation twinning is an important deformation mechanism in a variety of materials, including metals and ceramics. This deformation mechanism is particularly important in low-symmetry hexagonal close-packed (hcp) metals such as Magnesium…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…
Deformation twinning is a form of permanent deformation that is commonly observed in low symmetry crystals such as hexagonal close-packed (hcp) metals. With recent increased interest in using hcp metals, such as magnesium, in structural,…
Deformation twinning and martensitic transformations are displacive transformations; they are defined by high speed collective displacements of the atoms, the existence of a parent/daughter orientation relationship, and plate or lath…
Magnesium (Mg) and its alloys hold great potential as an energy-saving structural material for automative, aerospace applications. However, the use of Mg alloys has been limited due to poor ductility and formability. Poor mechanical…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
Deformation twinning in pure aluminum has been considered to be a unique property of nanostructured aluminum. A lingering mystery is whether deformation twinning occurs in coarse-grained or single-crystal aluminum, at scales beyond…
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore…
Tensile twinning is a main deformation mode in hexagonal close packed structure metals, so it is important to comprehensively understand twinning mechanisms which are not fully disclosed using 2D or small volume 3D characterization…
Twinning is an important deformation mode in plastically deformed hexagonal close-packed materials. The extremely high twin growth rates at the nanoscale make atomistic simulations an attractive method for investigating the role of…
A polycrystalline plasticity model, which incorporates the contribution of deformation twinning, is proposed. For this purpose, each material point is treated as a composite material consisting of a parent constituent and multiple twin…
High-density and nanosized deformation twins in face-centered cubic (fcc)materials can effectively improve the combination of strength and ductility. However, the microscopic dislocation mechanisms enabling a high twinnability remain…
It is shown that mechanical twinning in smectic crystals is possible. The structure of the boundary of twins for a small disorientation of crystallites is determined. The periodic twin structure, which should appear at the tension of the…
Dislocation slip and deformation twin are widely regarded as two important mechanisms of active competition in the process of plastic deformation. Calculating and comparing the critical resolved shear stress (CRSS) of two deformation modes…
The cyclic deformation behavior of extruded Mg-8.5wt.%Al alloy with a conventional extrusion texture and a modified texture is systematically investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent (EVPSC)…
The competition between deformation twinning and dislocation slip underpins the evolution of mesoscale plasticity in face-centered cubic materials. While competition between these mechanisms is known to be related to the critical features…
Deformation twinning, which occurs in fcc metals only under particular conditions of intrinsic material properties, microstructure, and loading conditions, occupies an indispensable place in their deformation mechanism maps. Nonetheless,…
Zirconium alloys are used in the nuclear industry as structural materials, and can be subject to high strain rate loading conditions during forming and in the case of a reactor accident. In this context, the relationship between strain rate…