相关论文: Studies on thermal degradation behavior of nano si…
We report the interactions of cationic latex particles synthesized by RAFT/MADIX-mediated emulsion polymerization with anionic cellulose nanocrystals (CNCs) and cotton fabrics. Latexes in the size range 200-300 nm with poly(butyl acrylate)…
Grain boundary networks should play a dominant role in determining the mechanical properties of nanocrystalline metals. However, these networks are difficult to characterize and their response to deformation is incompletely understood. In…
Introducing hierarchical disorder from multiple defects into materials through nanostructuring is one of the most promising directions to achieve extremely low thermal conductivities and thus improve thermoelectric performance. The success…
The degradation of the hemi-wicking property of superhydrophilic high-energy surfaces due to contaminant adsorption from the ambient atmosphere is well documented. This degradation compromises the performance of such surfaces, thus…
It was experimentally found that the evolution of dielectric loss with processing temperature displays a common trend in ferroelectric and dielectric thin oxide films: firstly an increase and then a decrease in dielectric loss when the…
We describe a microscope-based optical setup that allows us to perform space-and time-resolved measurements of the spectral reflectance of transparent substrates coated with ultrathin films. This technique is applied to investigate the…
Condensation, melting and freezing of nitrogen in a powder of mesoporous silica grains (SBA-15) has been studied by combined volumetric sorption isotherm and scanning calorimetry measurements. Within the mean field model of Saam and Cole…
Nanostructured materials and nanocomposites have shown great promise for improving the efficiency of thermoelectric materials. Herein, Fe nanoparticles were imbedded into a CrN matrix by combining two physical vapor deposition approaches,…
Aluminum-Copper (Al-Cu) alloys are essential materials for weight reduction critical structures in the aerospace and automotive industries, yet achieving their maximum ultrahigh-strength potential remains limited by nanoscale defect control…
We examine the dynamics of silica particles grafted with high molecular weight polystyrene suspended in semidilute solutions of chemically similar linear polymer using x-ray photon correlation spectroscopy. The particle dynamics decouple…
During the fabrication process of large scale silicene through common chemical vapor deposition (CVD) technique, polycrystalline films are quite likely to be produced, and the existence of Kapitza thermal resistance along grain boundaries…
With the technology of artificial defects creating, we can tune the band structure and transport properties of many two-dimensional (2D) layered materials. One prototype materials system is the antidoted graphene sheet, where periodical…
Modification of surfaces to enable dropwise condensation is a promising approach for achieving high condensation rates. In this work, we present an experimental study on condensation of water on copper surfaces coated with an ultrathin, 5…
In this article, we report the process induced variation in the characteristics of PECVD deposited and thermally grown silicon dioxide (SiO2) thin film. We find key differences in the porosity, arrangement of the nano-pores, surface…
We report the mechanical response of a model nanocomposite system of poly(styrene) (PS)-silica to large-amplitude oscillatory shear deformations. Nonlinear behavior of PS nanocomposites is discussed with the changes in particle dispersion…
Patterning of diamond-like carbon (DLC) and DLC:metal nanocomposites is of interest for an increasing number of applications. We demonstrate a nanoimprint lithography process based on silicon containing thermoplastic resist combined with…
The question of if silica nanoparticles can enhance the ionic conductivity of a polymer electrolyte above its crystallization temperature has remained unclear for the two decades following the first experiments on these systems. We use…
Nanoporous materials are of broad interest for various applications, in particular advanced thermoelectric materials. The introduction of nanoscale porosity, even at modest levels, has been known to drastically reduce a materials thermal…
The reduction of the thermal conductivity in nanostructures opens up the possibility of exploiting for thermoelectric purposes also materials such as silicon, which are cheap, available and sustainable but with a high thermal conductivity…
Thermo-osmosis refers to fluid migration due to temperature gradient. The mechanistic understanding of thermo-osmosis in charged nano-porous media is still incomplete, while it is important for several environmental and energy applications,…