相关论文: Integrated Modeling of Second Phase Precipitation …
Formation of large volume fractions of Mn-Ni-Si precipitates (MNSPs) causes excess irradiation embrittlement of reactor pressure vessel (RPV) steels at high, extended-life fluences. Thus, a new and unique, semi-empirical cluster dynamics…
Radiation-enhanced precipitation of Cr-rich {\alpha}' in irradiated Fe-Cr alloys, which results in hardening and embrittlement, depends on the irradiating particle and the displacement per atom (dpa) rate. Here, we utilize a Cahn-Hilliard…
The Langer-Schwartz equations for precipitation are formulated to calculate nucleation, growth and coarsening of second phase precipitates under non-isothermal situations. A field-theoretic steady-state nucleation rate model is used in the…
A multiscale approach based on the phase-field model is developed to simulate homogeneous and heterogeneous formation of {\theta}' precipitates during high temperature ageing in Al-Cu alloys. The model parameters that determine the…
The grain boundary (GB) microchemistry and precipitation behaviour in high-strength Al-Zn-Mg-Cu alloys has an important influence on their mechanical and electrochemical properties. Simulation of the GB segregation, precipitation, and…
A multidisciplinary approach is presented to analyse the precipitation process in a model Al-Cu alloy. Although this topic has been extensively studied in the past, most of the investigations are focussed either on transmission electron…
Precipitation during high temperature aging of Al-Cu alloys is analyzed by means of the integration of classical nucleation theory and phase-field simulations into a multiscale modelling approach based on well-established thermodynamics…
Ion irradiation provides a promising substitute to neutron tests for investigating the effects of radiation on materials for fission and fusion reactor plants. Here we show proton irradiation can quantitatively reproduce precipitation that…
Tungsten (W) is the leading candidate material for plasma-facing components in fusion reactors, yet its upper operational temperature is limited by premature grain growth and recrystallization processes. Irradiation adds further…
The T91 grade and similar 9Cr tempered-martensitic steels (also known as ferritic-martensitic) are leading candidate structural alloys for fast fission nuclear and fusion power reactors. At low temperatures (300 to 400 $^\circ$C) neutron…
This work presents a detailed investigation into the effect of a low Cu addition (0.01 at.%) on precipitation in an Al-0.80Mg-0.85Si alloy during ageing. The precipitate crystal structures were assessed by scanning transmission electron…
The spatial distribution and morphology of precipitates formed during aging are key factors that determine the precipitation hardening response of various magnesium-rare earth alloys. In recent years, the use of high-performance computing…
The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $\theta'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out…
This work presents a high-fidelity computational fluid dynamics (CFD) and data-driven modeling framework for assembly-level flow characterization in a four-loop pressurized water reactor (PWR). A full lower-plenum and core-inlet domain was…
Research over the years has shown that the formation of the Fe$_3$Si phase in FINEMET (Fe-Si-Nb-B-Cu) alloys leads to superior soft magnetic properties. In this work, we use a CALPHAD approach to derive Fe-Si phase diagrams to identify the…
Cadmium sulfide is a valuable material for solar cells, photovoltaic, and radiation detectors. It is thus important to evaluate the material damage mechanisms and damage threshold in response to irradiation. Here, we simulate the ultrafast…
Cobalt-based alloys with {\gamma}/{\gamma}' microstructures have the potential to become the next generation of superalloys, but alloy compositions and processing steps must be optimized to improve coarsening, creep, and rafting behavior.…
In this work we consider the semi-batch process of precipitation of calcium carbonate solids from a solution containing calcium ions by adjusting the pH of the solution. The change in pH is induced either by the addition of alkaline…
The high strength of structural aluminium alloys depends strongly on the controlled precipitation of specific intermetallic phases, whose identity and crystal structure can be difficult to predict. Here, we investigate the Al-Pt system,…
A model for corrosion-induced cracking of reinforced concrete subjected to non-uniform chloride-induced corrosion is presented. The gradual corrosion initiation of the steel surface is investigated by simulating chloride transport…