相关论文: Hybrid Precoding for Multi-Group Physical Layer Mu…

The deployment of millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems cannot rely solely on digital precoding due to hardware constraints. Instead, hybrid precoding, which combines digital and radio frequency (RF)…

This article addresses the design of multigroup multicast communications in the pinching-antenna system (PASS). A PASS-enabled multigroup transmission framework is proposed to maximize multicast rates under a couple of transmission…

Modern 5G communication systems employ multiple-input multiple-output (MIMO) in conjunction with orthogonal frequency division multiplexing (OFDM) to enhance data rates, particularly for wideband millimetre wave (mmW) applications. Since…

Millimeter-wave (mmWave) multiple-input multiple-out (MIMO) systems relying on lens antenna arrays are capable of achieving a high antenna-gain at a considerably reduced number of radio frequency (RF) chains via beam selection. However, the…

Industry 4.0 anticipates massive interconnectivity of industrial devices (e.g., sensors, actuators) to support factory automation and production. Due to the rigidity of wired connections to harmonize with automation, wireless information…

In this paper, we propose a feedback-efficient hybrid precoding framework for wideband millimeter-wave (mmWave) multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems. To mitigate the high cost of…

The application of hybrid precoding in millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems has been proved effective for reducing the number of radio frequency (RF) chains. However, the maximum number of independent data…

In this paper, the problem of designing a forward link linear precoder for Massive Multiple-Input Multiple-Output (MIMO) systems in conjunction with Quadrature Amplitude Modulation (QAM) is addressed. First, we employ a novel and efficient…

In this paper, we present an experimental and simulation based study to evaluate the use of full-duplex as a mode in practical IEEE 802.11 networks. To enable the study, we designed a 20 MHz multi-antenna OFDM full-duplex physical layer and…

Multiple-input multiple-output (MIMO) or multi-antenna communication is a key technique to achieve high spectral efficiency in wireless systems. For the point-to-point MIMO channel, it is a well-known result that the channel singular value…

The spectral efficiency of wireless networks can be made nearly infinitely large by deploying many antennas, but the deployment of very many antennas requires new topologies beyond the compact and discrete antenna arrays used by…

We address the problem of analyzing and classifying in groups the downlink channel environment in a millimeter-wavelength cell, accounting for path loss, multipath fading, and User Equipment (UE) blocking, by employing a hybrid propagation…

The evolution of 5G New Radio (NR) has brought significant improvements in signal strength and service quality for users. By integrating Multiple Input Multiple Output (MIMO) systems into communications, multiple data streams can be…

This paper proposes a novel neural network architecture, that we call an auto-precoder, and a deep-learning based approach that jointly senses the millimeter wave (mmWave) channel and designs the hybrid precoding matrices with only a few…

Multiple-input multiple-output (MIMO) communication has led to immense enhancements in data rates and efficient spectrum management. The evolution of MIMO, though, has been accompanied by increased hardware complexity and array sizes,…

Hybrid digital and analog beamforming is a highly effective technique for implementing beamforming methods in millimeter wave (mmWave) systems. It provides a viable solution to replace the complex fully digital beamforming techniques.…

Optimal physical layer multicasting (PLM) is an NP-hard problem that for simplicity has been studied under idealistic assumptions, e.g., availability of perfect channel state information (CSI), both at the base station (BS) and at the user…

Hybrid precoding has been recognized as a promising technology to combat the path loss of millimeter wave signals in massive multiple-input multiple-output (MIMO) systems. However, due to the joint optimization of the digital and analog…

Large in the number of transmit elements, multi-antenna arrays with per-element limitations are in the focus of the present work. In this context, physical layer multigroup multicasting under per-antenna power constrains, is investigated…

Hybrid analog-digital precoding significantly reduces the hardware costs in massive MIMO transceivers when compared to fully-digital precoding at the expense of increased transmit power. In order to mitigate the above shortfall, we use the…