相关论文: The Effect of Na on Cu-K-In-Se Thin Film Growth
Films of Cu-K-In-Se were co-evaporated at varied K/(K+Cu) compositions and substrate temperatures (with constant (K+Cu)/In ~ 0.85). Increased Na composition on the substrate's surface and decreased growth temperature were both found to…
Two strategies for enhancing photovoltaic (PV) performance in chalcopyrite solar cells were investigated: Cu1-xKxIn1-yGaySe2 absorbers with low K content (K/(K+Cu), or x ~ 0.07) distributed throughout the bulk, and CuIn1-yGaySe2 absorbers…
To advance knowledge of K bonding in Cu(In,Ga)(Se,S)2 (CIGS) photovoltaic (PV) absorbers, recent Cu-K-In-Se phase growth studies have been extended to PV performance. First, the effect of distributing K throughout bulk Cu1-xKxInSe2…
This study underscores the pivotal role of sodium (Na) supply in optimizing the optoelectronic properties of wide bandgap (~1.6 eV) Cu(In,Ga)S2 (CIGS) thin film absorbers for high efficiency solar cells. Our findings demonstrate that the…
Cu2O nanorods have been deposited on soda-lime glass (SLG) substrates by the modified SILAR technique by varying the concentration of NaCl electrolyte into the precursor complex solution. The structural, electrical, and optical properties…
Cu added CdS films were synthesized using spin coating technique at different spin speeds for different time durations. Films were subsequently annealed at different temperatures for different time periods in air to crystallize the phase of…
In-growth or post-deposition treatment of $Cu_{2}ZnSnS_{4}$ (CZTS) absorber layer had led to improved photovoltaic efficiency, however, the underlying physical mechanism of such improvements are less studied. In this study, the…
Through the positive role of alkali halides in realizing large area growth of transition metal-di-chalcogenide layers has been validated, the film-growth kinematics has not yet been fully established. This work presents a systematic…
Chalcopyrite semiconductors are of considerable interest for application as absorber layers in thin-film photovoltaic cells. When growing films of these compounds, however, they are often found to contain CuAu- like domains, a metastable…
Wide-gap Cu(In,Ga)S2 solar cells with In2O3:Sn (ITO) as transparent back contact are evaluated for the application as top cells in tandem devices. The effect of Na on the solar cell performance is investigated by supplying additional Na by…
The utilization of alkali salts, such as NaCl and KI, have enabled the successful growth of large single domain and fully coalesced polycrystalline two-dimensional (2D) transition metal dichalcogenide layers. However, the impact of alkali…
We investigate the synthesis of kesterite Cu2ZnSnS4 (CZTS) polycrystalline thin films using cosputtering from binary sulfide targets followed by annealing in sulfur vapor at 500 {\deg}C to 650 {\deg}C. The films are the kesterite CZTS phase…
Cu2ZnSnS4 (CZTS) is a promising thin-film solar-cell material consisted of earth abundant and nontoxic elements. Yet, there exists a fundamental bottle neck that hinders the performance of the device due to complexed intrinsic defects…
We report growth characteristics of epitaxial $\beta$-Na$_{0.6}$CoO$_{2}$ and $\gamma$-Na$_{0.7}$CoO$_{2}$ thin films on (001) sapphire substrates grown by pulsed-laser deposition. Reduction of deposition rate could change structure of…
Cu-based chalcogenides are promising materials for thin-film solar cells with more than 20% measured cell efficiency. Using first-principles calculations based on density functional theory, the optoelectronic properties of a group of…
Cuprous oxide (Cu2O) films from 25 nm to 1500 nm were electrodeposited on n-Si(100) and Ni/n-Si(100) substrates from aqueous solution at room temperature. X-ray diffraction and transmission electron microscopy imaging show that the Cu2O…
Synthesis of large-scale, uniform, easily transferable, and highly crystalline monolayer (1L) molybdenum disulfide (MoS2) on different substrates is a challenge and could decide its suitability for opto-electronic device applications.…
Thin films of TiN were sputter-deposited onto Si and sapphire wafers with and without SiN buffer layers. The films were fabricated into RF coplanar waveguide resonators, and internal quality factor measurements were taken at millikelvin…
Tin Selenide (SnSe) thin films were grown onto glass and alumina substrates by Chemical Vapor Deposition (CVD) method. The structural, micro-structural and morphological characterizations of the as grown thin films were investigated using…
Co25Fe75 ferromagnetic films exhibit ultralow magnetic damping. The magnetic damping dependence of Cobalt Iron thin films over a Co composition (23 to 36%) is here reported. The thin film structures were sputter deposited at ambient…