相关论文: Effects of Interstitial Oxygen and Carbon on Niobi…
Superconducting radiofrequency (SRF) cavities are the leading technology for highly efficient particle acceleration, and their performance can be significantly enhanced through the controlled introduction of interstitial impurities into…
Niobium superconducting radiofrequency cavities enable applications in modern accelerators and quantum computers. However, the surface resistance significantly deteriorates the cavities performance. Nitrogen doping surface treatment can…
We report a surface treatment that systematically improves the quality factor of niobium radio frequency cavities beyond the expected limit for niobium. A combination of annealing in a partial pressure of nitrogen or argon gas and…
We report the rf performance of a single-cell superconducting radiofrequency cavity after low temperature baking in a nitrogen environment. A significant increase in quality factor has been observed when the cavity was heat treated in the…
We report a strong effect of the cooling dynamics through $T_\mathrm{c}$ on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface…
We report the RF performance of several single-cell superconducting radio-frequency cavities subjected to low temperature heat treatment in nitrogen environment. The cavities were treated at temperature 120 - 165 $^{\circ}$C for an extended…
The radio-frequency surface resistance of niobium resonators is incredibly reduced when nitrogen impurities are dissolved as interstitial in the material, conferring ultra-high Q-factors at medium values of accelerating field. This effect…
The Q-factor of superconducting accelerating cavities can be substantially improved by a special heat treatment under N2 atmosphere (N-doping). Recent experiments at Fermi National Laboratory investigated the dependence of Q on the RF…
Recently, Nb superconducting radio frequency cavities vacuum heat treated between 300-400 C for a few hours have exhibited very high quality factors (~5x10^10 at 2.0 K). New secondary ion mass spectrometry measurements of O, N and C show…
A detailed study of the near-surface structure and composition of Nb, the material of choice for Superconducting Radio Frequency accelerator (SRF) cavities, is of great importance in order to understand the effects of different treatments…
It is well known that moderate temperature baking of niobium cavities can improve the surface resistance. Presently, it is believed that the diffusion of oxygen into the bulk, resulting in interstitial defects, is responsible for the…
Niobium provides the basis for all superconducting radio frequency (SRF) cavities in use, however, hydrogen is readily absorbed by niobium during cavity fabrication and subsequent niobium hydride precipitation when cooled to cryogenic…
Cold electropolishing (EP) of a nitrogen-doped (N-doped) niobium (Nb) superconducting RF (SRF) cavity was found to improve its quality factor. In order to understand the effect of EP temperature on N-doped and undoped surfaces, a systematic…
Previous work has demonstrated that the radio frequency surface resistance of niobium resonators is dramatically reduced when nitrogen impurities are dissolved as interstitial in the material. The origin of this effect is attributed to the…
Structural and superconducting properties of high quality Niobium nanofilms with different thicknesses are investigated on silicon oxide and sapphire substrates. The role played by the different substrates and the superconducting properties…
Vacuum thermal treatments (baking) are known to improve the superconducting properties of the RF surface layer of niobium cavities, and are employed as a last processing step to increase their efficiency determined by intrinsic quality…
Nitrogen-doping and furnace-baking are advanced high-Q0 recipes developed for 1.3 GHz TESLA-type cavities. These treatments will significantly benefit the high-Q0 linear accelerator community if they can be successfully adapted to different…
In this article a new idea is proposed by PKU group to improve the RF superconductive property of niobium cavity. Rare earth elements like scandium and yttrium are doped into ingot niobium during the smelting processes. A series of…
In the present work the chemical composition of niobium surface upon 200-400 {\deg}C baking similar to "medium-temperature baking" and "furnace baking" of cavities is explored in-situ by synchrotron X-ray photoelectron spectroscopy (XPS).…
Niobium-coated copper radio-frequency cavities are cost-effective alternatives to bulk niobium cavities, given the lower material costs of copper substrates and their operation in liquid helium at around 4.2 K. However, these cavities…