相关论文: Hollow carbon sphere/metal oxide nanocomposite ano…
Natural abundance, impressive chemical characteristics and economic feasibility have rekindled the appeal for rechargeable sodium (Na) batteries as a practical solution for the growing energy demand, environmental sustainability and energy…
Cubic spinel lithium manganese oxide (LiMn2O4) has been able to attract a great deal of attention over the years as a promising cathode material for large scale lithium ion batteries. Here a facile hydrothermal route followed by solid state…
We report a comprehensive study on the electrochemical performance of four different Transition Metal Oxides encapsulated inside carbon nanotubes (CNT). Irrespective of the type of oxide-encapsulate, all these samples exhibit superior…
Sodium ion batteries become popular due to their low cost. Among possible anode materials of sodium ion batteries, phosphorus has great potential owing to its high theoretical capacity. Previous research that yielded high capacity and long…
The performance of lithium and sodium ion batteries relies notably on the accessibility to carbon electrodes of controllable porous structure and chemical composition. This work reports a facile synthesis of well-defined porous N-doped…
Black phosphorous is a layered material having a high capacity of 2596 mAh/g as a battery electrode, however it suffers from cracking due to high volume expansion during lithiation. These cracks causes loss of electrical contact in the…
We describe Na0.67Mn0.625Fe0.25Co0.125O2 (NMFCO), a P2-type sodium-ion battery cathode. Our composition, with significantly less Co than in an earlier study, shows discharge capacity close to 190 mAhg-1 and specific energy density exceeding…
Herein, in-situ reduction of bismuth and graphene oxide was performed by a solvothermal method under a nitrogen atmosphere, and the resulting Bi on RGO nanocomposites were used as an anode material for Mg-ion batteries. The nanocomposite of…
N-graphdiyne monolayers, a set of carbon-nitride nanosheets, have been synthesized recently through the polymerization of triazine- and pyrazine-based monomers. Since the two-dimensional nano-structures are mainly composed of light-weight…
A new nanofibrous material, consisting of a conductive carbon core and an external layer made of vanadium oxide, has been studied as a cathode for aluminium-ion batteries. The material enables a mixed-ion intercalation mechanism, resulting…
As silicon is approaching its theoretical limit for the anode materials in lithium battery, searching for a higher limit is indispensable. Herein, we demonstrate the possible of achieving ultrahigh capacity over 6500 mAh g-1 in…
MXenes' tunable properties make them excellent candidates for many applications in future nanoelectronics. In this work, we explore the suitability of Sc$_2$CX (X=N$_2$, ON, O$_2$) MXenes to act as the active anode materials in Na-ion based…
Na, K and Ca-ion battery electrode materials with appropriate electrochemical properties are desirable candidates for replacing lithium-ion batteries (LIBs) because of their natural richness and low cost. Recently, MoO2 has been reported as…
In this study, we employ first-principles density functional theory (DFT) calculations to investigate the electrochemical properties of Nb2C and Nb2CO2 MXenes as potential anode materials for sodium-ion (SIBs) and lithium-ion batteries…
Li-ion rechargeable batteries have enabled the wireless revolution transforming global communication. Future challenges, however, demands distributed energy supply at a level that is not feasible with the current energy-storage technology.…
MoO2/C-composites have been fabricated for the first time by a tartaric acid/glucose-assisted sol-gel method with post-annealing at 500 {\deg}C for 1 h in N2 flow. The synthesized materials were fully characterized with respect to…
In search of the potential cathode materials for sodium-ion batteries and to understand the diffusion kinetics, we report the detailed analysis of electrochemical investigation of honeycomb structured Na$_{2}$Ni$_{2}$TeO$_{6}$ material…
Silicon suboxide is currently considered as a unique candidate for lithium ion batteries anode materials due to its considerable capacity. However, no adequate information exist about the role of oxygen content on its performance. To this…
A high reversible capacity is a key feature for any rechargeable battery. In the lithium-ion battery technology, tin-oxide anodes do fulfill this requirement, but a fast loss of capacity hinders a full commercialization. Using…
The efficient energy storage devices are crucial to meet the soaring global energy demand for sustainable future. Recently, the sodium-ion batteries (SIBs) have emerged as one of the excellent cost effective solution due to the uniform…