相关论文: Long-term stability and temperature variability of…
The mechanical properties and deformation mechanisms of Cu/Nb nanoscale metallic multilayers (NMMs) manufactured by accumulative roll bonding (ARB) are studied at 25C and 400C. Cu/Nb NMMs with individual layer thicknesses between 7 and 63…
Molecular dynamics simulations are performed to examine the dynamic response of amorphous solids to oscillatory shear at finite temperatures. The data were collected from a poorly annealed binary glass, which was deformed periodically in…
Indoor thermal comfort in smart buildings has a significant impact on the health and performance of occupants. Consequently, machine learning (ML) is increasingly used to solve challenges related to indoor thermal comfort. Temporal…
Delay line oscillators based on photonic components, such as the optoelectronic oscillator (OEO), offer the potential for realization of phase noise levels orders of magnitude lower than achievable by conventional microwave sources. Fibre…
The Helioseismic and Magnetic Imager (HMI) instrument is a major component of NASA's Solar Dynamics Observatory (SDO) spacecraft. Since beginning normal science operations on 1 May 2010, HMI has operated with remarkable continuity, e.g.…
Due to turbulence in the atmosphere images taken from ground-based telescopes become distorted. With adaptive optics (AO) images can be given greater clarity allowing for better observations with existing telescopes and are essential for…
In the storage ring of PLS-II, we reduced mechanical displacement of electron beam position monitors (e-BPMs) that is caused by heating during e-beam storage. The orbit feedback system intends that the electron beam pass through the center…
We have measured the mechanical loss of a dielectric multilayer reflective coating (ion-beam sputtered SiO$_2$ and Ta$_2$O$_5$) in cooled mirrors. The loss was nearly independent of the temperature (4 K $\sim$ 300 K), frequency, optical…
We use JWST NIRCam short wavelength photometry to capture a transit lightcurve of the exoplanet HAT-P-14 b to assess performance as part of instrument commissioning. The short wavelength precision is 152 ppm per 27 second integration as…
Adaptive (or deformable) mirrors are widely used as wavefront correctors in adaptive optics systems. The optical calibration of an adaptive mirror is a fundamental step during its life-cycle: the process is in facts required to compute a…
Adaptive Optics at mid-IR wavelengths has long been seen as either not necessary or easy. The impact of atmospheric turbulence on the performance of 8-10 meter class telescopes in the mid-IR is relatively small compared to other performance…
We study the effects of small temperature as well as disorder perturbations on the equilibrium state of three-dimensional Ising spin glasses via an alternate scaling ansatz. By using Monte Carlo simulations, we show that temperature and…
We provide an overview of the most important calibration aspects of the NICMOS instrument on board of HST. We describe the performance of the instrument after the installation of the NICMOS Cooling System, and show that the behavior of the…
We report on dynamic effects associated with thermally-annealing amorphous indium-oxide films. In this process the resistance of a given sample may decrease by several orders of magnitude at room-temperatures, while its amorphous structure…
We develop a comprehensive approach to simulate the deformation of mirrors and lenses due to thermal and mechanical stresses that couples efficiently to photon-based optics simulations. This expands upon previous work where we demonstrated…
The composition-dependent thermal stability of (Cr$_{0.47 \mp 0.03}$Al$_{0.53 \mp 0.03}$)$_{z}$(O$_{y}$N$_{1-y}$)$_{1-z}$ thin films with O concentrations of y = 0, 0.15, and 0.40 is investigated up to 1200 {\deg}C and then compared to…
We propose a marginally stable optical resonator suitable for atom interferometry. The resonator geometry is based on two flat mirrors at the focal planes of a lens that produces the large beam waist required to coherently manipulate cold…
The influence of a deformable mirror on spatial light modulation in ultrafast lasers processing is demonstrated. The deformable mirror was integrated into an optical setup which contains an additional lens for generating a nearly linear…
Long-term memory is a feature observed in systems ranging from neural networks to epidemiological models. The memory in such systems is usually modeled by the time delay. Furthermore, the nonlocal operators, such as the "fractional order…
The algebraic stability theorem for $\mathbb{R}$-persistence modules is a fundamental result in topological data analysis. We present a stability theorem for $n$-dimensional rectangle decomposable persistence modules up to a constant…