相关论文: Prediction of the vibroacoustic response of a stru…
We propose the design of an impedance matching acoustic bend in this article. The bending structure is composed of sub-wavelength unit cells with perforated plates and side pipes, whose mass density and bulk modulus can be tuned…
Membrane-type Acoustic Metamaterials (MAMs) have demonstrated unusual capacity in controlling low-frequency sound transmission/reflection. In this paper, an analytical vibroacoustic membrane model is developed to study sound transmission…
We consider flux-based multiple-porosity/multiple-permeability poroelasticity systems describing multiple-network flow and deformation in a poro-elastic medium, sometimes also referred to as MPET models. The focus of the paper is on the…
An experimental investigation of the acoustical behaviour of a liner in a rectangu- lar channel with grazing flow has been conducted. The liner consists of a ceramic structure of parallel square channels: 1mm by 1 mm in cross section, 65 mm…
This paper presents an experimental and theoretical study of the nonlinear behavior of imperfect interfaces in multilayer structures using an equivalent vibro-acoustic approach. The multilayer system is modeled through a Zig-Zag…
Acoustic transparency is the capability of a medium to transmit mechanical waves to adjacent media, without scattering. This characteristic can be achieved by carefully engineering the acoustic impedance of the medium -- a combination of…
This paper presents a straightforward application of an indirect method based on a three-microphone impedance tube setup to determine the non-acoustic properties of a sound absorbing porous material. First, a three-microphone impedance tube…
Hydrodynamic modes in the turbulent mixing layer over a cavity can constructively interact with the acoustic modes of that cavity and lead to aeroacoustic instabilities. The resulting limit cycles can cause undesired structural vibrations…
This study investigates a vibroacoustic phononic metamaterial system composed of repeated monolayered membrane-air cavity unit-cells to assess its efficacy in controlling sound waves. Assuming low-frequency axisymmetric modes, the coupled…
Impedance eduction methods are the current standard approach to measure the impedance of acoustic liner under sheared grazing flow. The dedicated facilities for these methods consists on a waveguide with rectangular cross-section, which…
In the first part of the paper a generalized theoretical approach towards beam coupling impedances and stretched-wire measurements is introduced. Applied to a circular symmetric setup, this approach allows to estimate the systematic…
Porous materials are effective for the isolation of sound with medium to high frequencies, while periodic structures are promising for low to medium frequencies. In the present work, we study the sound insulation of a periodically…
We study the dynamics of ionic liquids in a thin slit pore geometry. Beginning with the classical and dynamic density functional theories for systems of charged hard spheres, an asymptotic procedure leads to a simplified model which…
This paper introduces simple analytical formulas for the grid impedance of electrically dense arrays of square patches and for the surface impedance of high-impedance surfaces based on the dense arrays of metal strips or square patches over…
In this work, we propose a technique to enhance the performance of circular patch antennas using an embedded system of cylindrical impedance surfaces. The technique utilizes a derived analytical model of a circular patch antenna containing…
We develop a one-dimensional network model to predict the steady-state distribution of yield-stress fluids in branched pipe manifolds under wall-slip conditions. The model accounts for major friction losses between junctions and…
We consider the acoustic propagation in lined flow duct with a purely reactive impedance at the wall. This reacting liner has the capability to reduce the speed of sound, and thus to enhance the interaction between the acoustic propagation…
Background: The acoustic damping in gas turbines and aero-engines relies to a great extent on acoustic liners that consists of a cavity and a perforated face sheet. The prediction of the impedance of the liners by direct numerical…
Extraordinary acoustic transmission is commonly associated with periodic or multi-aperture structures. In this work, we show that a single subwavelength slit can support strongly enhanced transmission when its boundary response is described…
Coaxial wire measurements have provided a simple and effective way to measure the beam coupling impedance of accelerator structures for a number of years. It has been known how to measure the longitudinal and dipolar transverse impedance…