相关论文: New Insights on Stacking Fault Behavior in Twin In…
Deformation twinning is a form of permanent deformation that is commonly observed in low symmetry crystals such as hexagonal close-packed (hcp) metals. With recent increased interest in using hcp metals, such as magnesium, in structural,…
High-density and nanosized deformation twins in face-centered cubic (fcc)materials can effectively improve the combination of strength and ductility. However, the microscopic dislocation mechanisms enabling a high twinnability remain…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…
Coarse-grained, metallic materials undergo microstructure refinement during tribological loading. This in turn results in changing tribological properties, so understanding deformation under tribological load is mandatory when designing…
The competition between deformation twinning and dislocation slip underpins the evolution of mesoscale plasticity in face-centered cubic materials. While competition between these mechanisms is known to be related to the critical features…
Deformation twinning is an important deformation mechanism in a variety of materials, including metals and ceramics. This deformation mechanism is particularly important in low-symmetry hexagonal close-packed (hcp) metals such as Magnesium…
Molecular dynamics simulations performed on <110> Cu nanopillars revealed significant difference in deformation behavior of nanopillars with and without twin boundary. The plastic deformation in single crystal Cu nanopillar without twin…
Metallic materials, especially steel, underpin transportation technologies. High-manganese twinning induced plasticity (TWIP) austenitic steels exhibit exceptional strength and ductility from twins, low-energy microstructural defects that…
The microstructural mechanisms governing energy storage during plastic deformation of twinning-induced plasticity (TWIP) steels remain insufficiently understood, particularly under conditions of strain localization. This study provides a…
A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6\%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain…
Metastable alloys, such as $\beta$-phase titanium (Ti) alloys with a body-centered cubic (BCC) lattice, can exhibit exceptional mechanical properties through the interplay of multiple deformation mechanisms -- diffusionless phase…
A new $\beta$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and…
Plasticity in body-centered cubic (BCC) nanocrystals is often associated with twin nucleation phenomena under extreme loading conditions. Here, we reveal unconventional twinning pathways that operate at the intersection of crystal…
Friction and wear of metals are critically influenced by the microstructures of the bodies constituting the tribological contact. Understanding the microstructural evolution taking place over the lifetime of a tribological system therefore…
Molecular dynamics simulations are performed to investigate the role of a coherent {\Sigma}3 (111) twin boundary on the plastic deformation behavior of Cu nanopillars. Our work reveals that the mechanical response of pillars with and…
The presence of interfaces and grain boundaries significantly impacts the mechanical properties of materials, particularly when dealing with micro- or nano-scale samples. Distinct interactions between dislocations and grain boundaries can…
Twinning is an important mode of plastic deformation in metallic nanopillars. When twinning occurs on multiple systems, it is possible that twins belonging to different twin systems interact and forms a complex twin-twin junctions.…
Stochastic geometry provides a powerful framework for modelling complex random structures, with applications in physics, materials science, biology, and other fields. The three-dimensional microstructure of polycrystalline materials is…
Deformation twinning significantly influences the microstructure, texture, and mechanical properties of metals, necessitating comprehensive studies of twin formation and interactions. While experimental methods excel at analyzing individual…
Plastic work partitioning was investigated in extruded AZ31B magnesium alloy under loading orientations promoting slip- or twinning-dominated deformation. Slip-dominated deformation exhibits stable plastic flow with approximately 50$\%$ of…