相关论文: Competing damage mechanisms in a two-phase microst…
Our goal is to unravel the mechanisms that lead to failure of a ductile two-phase material - that consists of a ductile soft phase and a relatively brittle hard phase. An idealized microstructural model is used to study damage propagation…
This paper studies a two-phase material with a microstructure composed of a hard brittle reinforcement phase embedded in a soft ductile matrix. It addresses the full three-dimensional nature of the microstructure and macroscopic…
The precise mechanisms underlying the failure of multi-phase materials may be strongly dependent on the material's microstructural morphology. Micromechanical modeling has provided much insight into this dependence, but uncertainties remain…
Multi-phase materials are key for modern engineering applications. They are generally characterized by a high strength and ductility. Many of these materials fail by ductile fracture of the, generally softer, matrix phase. In this work we…
Understanding the microstructural influence on the failure mechanisms in multi-phase materials calls for the identification of the worst-case scenario. This necessitates a statistical approach. By performing simulations directly based on…
Multi-phase material are frequently applied in a wide variety of products, as they posses a unique set of properties by combining two or more distinct phases at the level of the microstructure. Although the macroscopic stiffness and…
This paper presents a framework for modeling failure in quasi-brittle geomaterials under different loading conditions. A micromechanics-based model is proposed in which the field variables are linked to physical mechanisms at the microcrack…
Fracture processes in multi-phase solids are inherently complex due to multiple competing mechanisms. Here, we investigate the elastic and fracture behaviour of two-phase solids, comprising a fragile phase and a tough phase using a…
This paper unravels micromechanical aspects of metallic materials whose microstructure comprises grains of two or more phases. The local plastic response is determined by (i) the relative misorientation of the slip systems of individual…
Fracture propagation is highly sensitive to the conditions at the crack tip. In heterogeneous materials, microscale obstacles can cause propagation instabilities. Macroscopic heterogeneities modify the stress field over scales larger than…
We analyze the failure process of a two-component system with widely different fracture strength in the framework of a fiber bundle model with localized load sharing. A fraction 0\leq \alpha \leq 1 of the bundle is strong and it is…
Soft polymers are ubiquitous materials in nature and as engineering materials with properties varying from rate-independent to rate-dependent. Current fracture toughness measures are non-unique for rate-dependent soft materials for varying…
Multi-phase materials, such as composite materials, exhibit multiple competing failure mechanisms during the growth of a macroscopic defect. For the simulation of the overall fracture process in such materials, we develop a two-phase spring…
Impacted with sufficiently large stress, a dense, initially liquid-like suspension can be forced into a solid-like state through the process of shear jamming. While the onset of shear jamming has been investigated extensively, less is known…
Brittle fracturing of materials is common in natural and industrial processes over a variety of length scales. Knowledge of individual particle dynamics is vital to obtain deeper insight into the atomistic processes governing crack…
We investigate the role of microstructural bridging on the fracture toughness of composite materials. To achieve this, a new computational framework is presented that integrates phase field fracture and cohesive zone models to simulate…
In chemically reactive environments, the mechanical integrity of geomaterials is fundamentally compromised by solid matrix dissolution. In this study, we propose a fully coupled chemo-mechanical phase-field framework to capture the dynamic…
Fatigue fracture in ductile materials, e. g. metals, is caused by cyclic plasticity. Especially regarding the high numbers of load cycles, plastic material models resolving the full loading path are computationally very demanding. Herein, a…
The fundamental problem of friction in the presence of macroscopic adhesion, as in soft bodies, is receiving interest from many experimentalists. Since the first fracture mechanics `purely brittle' model of Savkoor and Briggs, models have…
A probabilistic approach to phase-field brittle and ductile fracture with random material and geometric properties is proposed within this work. In the macroscopic failure mechanics, materials properties and exactness of spatial quantities…