相关论文: On the Multiplexing Gain of Discrete-Time MIMO Pha…

This work studies the capacity of multipath fading channels. A noncoherent channel model is considered, where neither the transmitter nor the receiver is cognizant of the realization of the path gains, but both are cognizant of their…

The capacity of a discrete-time channel with correlated phase noises is investigated. In particular, the electro-optic frequency comb system is considered, where the phase noise of each subchannel is a combination of two independent Wiener…

A discrete-time Wiener phase noise channel with an integrate-and-dump multi-sample receiver is studied. An upper bound to the capacity with an average input power constraint is derived, and a high signal-to-noise ratio (SNR) analysis is…

Multiplexing services as a key communication technique to effectively combine multiple signals into one signal and transmit over a shared medium. Multiplexing can increase the channel capacity by requiring more resources on the transmission…

A discrete-time Wiener phase noise channel model is introduced in which multiple samples are available at the output for every input symbol. A lower bound on the capacity is developed. At high signal-to-noise ratio (SNR), if the number of…

Discrete-time Rayleigh fading multiple-input multiple-output (MIMO) channels are considered, with no channel state information at the transmitter and receiver. The fading is assumed to be correlated in time and independent from antenna to…

The capacity of ideal MIMO channels has a high-SNR slope that equals the minimum of the number of transmit and receive antennas. This letter analyzes if this result holds when there are distortions from physical transceiver impairments. We…

In multiple antenna systems, phase noise due to instabilities of the radio-frequency (RF) oscillators, acts differently depending on whether the RF circuitries connected to each antenna are driven by separate (independent) local oscillators…

The capacity of discrete-time, non-coherent, multipath fading channels is considered. It is shown that if the delay spread is large in the sense that the variances of the path gains do not decay faster than geometrically, then capacity is…

A continuous-time Wiener phase noise channel with an integrate-and-dump multi-sample receiver is studied. A lower bound to the capacity with an average input power constraint is derived, and a high signal-to-noise ratio (SNR) analysis is…

Multiple input multiple output (MIMO) system transmission is a popular diversity technique to improve the reliability of a communication system where transmitter, communication channel and receiver are the important elements. Data…

Multiple transmit antennas in a downlink channel can provide tremendous capacity (i.e. multiplexing) gains, even when receivers have only single antennas. However, receiver and transmitter channel state information is generally required. In…

The capacity of the discrete-time channel affected by both additive Gaussian noise and Wiener phase noise is studied. Novel inner and outer bounds are presented, which differ of at most $6.65$ bits per channel use for all channel…

In this paper, we study the effect of feedback channel noise on the diversity-multiplexing tradeoff in multiuser MIMO systems using quantized feedback, where each user has m transmit antennas and the base-station receiver has n antennas. We…

In this paper, we obtain the scaling laws of the sum-rate capacity of a MIMO X-channel, a 2 independent sender, 2 independent receiver channel with messages from each transmitter to each receiver, at high signal to noise ratios (SNR). The…

Discrete-time Rayleigh fading single-input single-output (SISO) and multiple-input multiple-output (MIMO) channels are considered, with no channel state information at the transmitter or the receiver. The fading is assumed to be stationary…

This paper considers an interference network composed of K half-duplex single-antenna pairs of users who wish to establish bi-directional communication with the aid of a multi-input-multi-output (MIMO) half-duplex relay node. This channel…

The large majority of commercially available multiple-input multiple-output (MIMO) radio channel measurement devices (sounders) is based on time-division multiplexed switching (TDMS) of a single transmit/receive radio-frequency chain into…

A waveform channel is considered where the transmitted signal is corrupted by Wiener phase noise and additive white Gaussian noise. A discrete-time channel model that takes into account the effect of filtering on the phase noise is…

In this work, novel upper and lower bounds for the capacity of channels with arbitrary constraints on the support of the channel input symbols are derived. As an immediate practical application, the case of multiple-input multiple-output…