相关论文: Nanomanufacturing of titania interfaces with contr…

Nanostructured films obtained by the assembling of preformed atomic clusters are of strategic importance for a wide variety of applications. The deposition of clusters produced in the gas phase onto a substrate offers the possibility to…

Deposition of clusters from the gas phase is becoming an enabling technology for the production of nanostructured devices. Supersonic clusters beam deposition (SCBD) has been shown as a viable route for the production of nanostructured thin…

A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of…

Originally developed technique based on generation of plasma-cluster flux emitted from cathode spots at surface of an integrally cold cathode has been applied for deposition of niobium superconductive (thick) film materials. Possibility for…

Being one of the strongest materials, ternary TiSiN exhibits a very interesting family of binary transition metal nitride and silicide systems. A novel technique to fabricate morphologically fascinating nano and micro structures of TiSiN is…

Highly crystalline TiO2 nanostructures were prepared through a facile inorganic acid-assisted hydrothermal treatment of hexagonal-structured assemblies of nanocrystalline titiania templated by cetyltrimethylammonium bromide (Hex-ncTiO2/CTAB…

Self-assembly via nanoscale phase-separation offers an elegant route to fabricate nanocomposites with physical properties unattainable in single-component systems. One important class of nanocomposites are optical metamaterials which…

Herein, titania thin films are fabricated by a facile liquid-phase method based on vacuum filtration of a colloidal suspension of titania nanosheets, which is followed by thermal annealing to transform the nanosheet film into anatase TiO2.…

Area-selective atomic layer deposition is a key technology for modern microelectronics as it eliminates alignment errors inherent to conventional approaches by enabling material deposition only in specific areas. Typically, the selectivity…

We report the atomic layer deposition of titanium dioxide on carbon nanosheet templates and investigate the effects of post-deposition annealing in a helium environment using different characterization techniques. The crystallization of the…

Synthesis of rationally designed nanostructured materials with optimized mechanical properties, e.g., high strength with considerable ductility, requires rigorous control of diverse microstructural parameters including the mean size, size…

This research for Eco-materials focuses on the improvement of photo response of titania thin films. The goal of this research is to find a suitable substrate for decreasing the band-gap of titania, to improve the microstructure and to seek…

Nanofabrication of topological insulator (TI) devices is essential for accessing edge and interface states, but conventional lithography and etching compromise the atomically clean surfaces required for scanning tunneling microscopy and…

2D-layered tin (II) oxide (SnO) has recently emerged as a promising bipolar channel material for thin-film transistors and complementary metal-oxide-semiconductor devices. In this work, we present a first-principles investigation of the…

The specific mechanisms which leads to the formation of fractal nanostructures by pulsed laser deposition remain elusive despite intense research efforts, motivated mainly by the technological interest in obtaining tailored nanostructures…

Nanostructured carbon films produced by supersonic cluster beam deposition have been studied by in situ Raman spectroscopy. Raman spectra show the formation of a sp2 solid with a very large fraction of sp-coordinated carbyne species showing…

The ability to confine light down to atomic scales is critical for the development of applications in optoelectronics and optical sensing as well as for the exploration of nanoscale quantum phenomena. Plasmons in metallic nanostructures can…

Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…

Titanium (Ti) is an adhesion and contact metal commonly used in nanoelectronics and two-dimensional (2D) materials research. However, when Ti is deposited on graphene (Gr), we obtain dramatically different film morphology depending on the…

Nanocomposite films were fabricated by supersonic cluster beam deposition (SCBD) of palladium clusters on Poly(methyl methacrylate) (PMMA) surfaces. The evolution of the electrical conductance with cluster coverage and microscopy analysis…