相关论文: Does a dissolution-precipitation mechanism explain…
This contribution studies a well-known failure criterion and its application to the life-time prediction of adhesive anchor systems under sustained load. The Monkman-Grant relation, which has previously been applied to a wide range of…
A hydrophilic liquid, such as water, forms hydrogen bonds with a hydrophilic substrate. The strength and locality of the hydrogen bonding interactions prohibit slip of the liquid over the substrate. The question then arises how the contact…
Bio-chemical reactions enable the production of biomimetic materials such as sandstones. In the present study, microbiologically-induced calcium carbonate precipitation (MICP) is used to manufacture laboratory-scale specimens for fracture…
Macroscopic voids at the steel-concrete interface and their degree of saturation with an aqueous electrolyte are known to play an important role in the corrosion of steel in reinforced concrete. Irrespective of the exposure conditions and…
When a jet of gas impinges vertically on a granular bed and forms a crater, the grains may be moved by several different mechanisms: viscous erosion, diffused gas eruption, bearing capacity failure, and/or diffusion-driven shearing. The…
The creep behaviour and microstructural evolution of a Sn-3Ag-0.5Cu wt.% sample with a columnar microstructure have been investigated through in-situ creep testing under constant stress of 30 MPa at 298 K. This is important, as 298 K is…
Recently, a new nonlocal granular rheology was successfully used to predict steady granular flows, including grain-size-dependent shear features, in a wide variety of flow configurations, including all variations of the split-bottom cell. A…
Building materials such as concretes and mortar are formed by solidifying granular slabs. Such materials are often fractured by giant forces such as during earthquakes, leading to the collapse of structures and potentially casualties. One…
Wet granular aggregates are common precursors of construction materials, food, and health care products. The physical mechanisms involved in the mixing of dry grains with a wet substrate are not well understood and difficult to control.…
The Nabarro-Herring (N-H) diffusional creep theory postulates the vacancy-mediated transport of atoms under a stress gradient as the creep mechanism under low-stress and high-temperature conditions. In multicomponent alloys, we premise that…
Cement is one of the most produced materials in the world. A major player in greenhouse gas emissions, it is the main binding agent in concrete, to which it provides a cohesive strength that rapidly increases during setting. Understanding…
This study investigates the effect of formulation, density and water content on the thermal conductivity of hemp concretes. The investigations are based on experimental measurements and on self-consistent scheme modelling. The thermal…
The wetting and filling properties of a fluid adsorbed on a solid grooved substrate are studied by means of a microscopic density functional theory. The grooved substrates are modelled using a solid slab, interacting with the fluid…
Energy dissipation in sheared dry and wet granulates is considered in the presence of an externally applied confining pressure. Discrete element simulations reveal that for sufficiently small confining pressures, the energy dissipation is…
In this work we investigate creep flow of aqueous suspension of Laponite, a model soft glassy material, at different aging times and stresses. We observe that this system shows time - aging time - stress superposition over a range of aging…
When submitted to a constant mechanical load, many amorphous solids display power law creep followed by fluidization. A fundamental understanding of these processes is still far from being achieved. Here, we characterize creep and…
When a granular bed is sheared by a fluid that flows above a critical limit, it undergoes a complex motion that varies along time: it can contain fluid- (bedload) and solid-like (creep) regions, being prone to strain hardening and, in case…
In order to reveal the coupling effect among the chemical activity and the hydraulic seepage as well as the mechanical properties, a constitutive theoretical framework considering the chemical activity for saturated porous media is derived…
The stress-induced yielding scenario of colloidal gels is investigated under rough boundary conditions by means of rheometry coupled to local velocity measurements. Under an applied shear stress, the fluidization of gels made of attractive…
The phenomenon of salt creeping along a free surface remains only partially understood, particularly with respect to its dynamics. In this work, combining a theoretical model with controlled experiments, we identify three distinct kinetic…