相关论文: Device-to-Device Millimeter Wave Communications: I…
Communication in the millimeter-wave (mmWave) band has recently been proposed to enable giga-bit-per-second data rates for next generation wireless systems. Physical layer security techniques have emerged as a simple and yet effective way…
Millimeter wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing…
This paper studies energy efficiency maximization in device-to-device (D2D) communications underlaying cellular networks in millimeter-wave (mm-wave) band. A stochastic geometry framework has been used to extract the results. First,…
Millimeter wave (mmWave) cellular systems will enable gigabit-per-second data rates thanks to the large bandwidth available at mmWave frequencies. To realize sufficient link margin, mmWave systems will employ directional beamforming with…
The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency present significant engineering challenges for the design of 5G cellular systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast quantities…
Communication and video capture from unmanned aerial vehicles (UAVs) offer significant potential for assisting first responders in remote public safety settings. In such uses, millimeter wave (mmWave) wireless links can provide high…
5G millimeter wave (mmWave) technology is envisioned to be an integral part of next-generation vehicle-to-everything (V2X) networks and autonomous vehicles due to its broad bandwidth, wide field of view sensing, and precise localization…
Configuring the antenna arrays is the main source of overhead in millimeter wave (mmWave) communication systems. In high mobility scenarios, the problem is exacerbated, as achieving the highest rates requires frequent link reconfiguration.…
As a means to control wireless propagation environments, the use of emerging and novel intelligent reflecting surfaces (IRS) is envisioned to enhance and broaden many applications in future wireless networks. This paper is concerned with a…
In the millimeter wave (30-300 GHz) and Terahertz (0.1-10 THz) frequency bands, high spreading loss and molecular absorption often limit the signal transmission distance and coverage range. In this paper, four directions to tackle the…
With the standardization of 5G, commercial millimeter wave (mmWave) communications has become a reality despite all the concerns about the unfavorable propagation characteristics of these frequencies. Even though the 5G systems are still…
There has been an increasing interest in the millimeter wave (mmW) frequency regime in the design of next-generation wireless systems. The focus of this work is on understanding mmW channel properties that have an important bearing on the…
Vehicular communications essentially support automotive applications for safety and infotainment. For this reason, industry leaders envision an enhanced role of vehicular communications in the fifth generation of mobile communications…
Fifth generation (5G) and beyond communication systems open the door to millimeter Wave (mmWave) frequency bands to leverage the extremely large operating bandwidths and deliver unprecedented network capacity. These frequency bands are…
Ultra-low latency and high reliability communications are the two defining characteristics of Tactile Internet (TI). Nevertheless, some TI applications would also require high data-rate transfer of audio-visual information to complement the…
Heterogeneous cellular networks (HCNs) with millimeter wave (mm-wave) communications are considered as a promising technology for the fifth generation mobile networks. Mm-wave has the potential to provide multiple gigabit data rate due to…
Internet of Things is one of the most promising technology of the fifth-generation (5G) mobile broadband systems. Data-driven wireless services of 5G systems require unprecedented capacity and availability. The millimeter-wave based…
Millimeter wave (mmWave) communication is a promising solution for coping with the ever-increasing mobile data traffic because of its large bandwidth. To enable a sufficient link margin, a large antenna array employing directional…
Future wireless communication systems will integrate both sub-6 GHz and millimeter wave (mmWave) frequency bands within multi-antenna architectures to meet the increasing demand for high data rates. In such multi-band systems, reliable…
Supporting high mobility in millimeter wave (mmWave) systems enables a wide range of important applications such as vehicular communications and wireless virtual/augmented reality. Realizing this in practice, though, requires overcoming…