相关论文: Binaural coherent-to-diffuse-ratio estimation for …

The estimation of the time- and frequency-dependent coherent-to-diffuse power ratio (CDR) from the measured spatial coherence between two omnidirectional microphones is investigated. Known CDR estimators are formulated in a common…

We investigate a speech enhancement method based on the binaural coherence-to-diffuse power ratio (CDR), which preserves auditory spatial cues for maskers and a broadside target. Conventional CDR estimators typically rely on a mathematical…

The reverberation time (T60) and the direct-to-reverberant ratio (DRR) are commonly used to characterize room acoustic environments. Both parameters can be measured from an acoustic impulse response (AIR) or using blind estimation methods…

This paper presents an unsupervised method for single-channel blind dereverberation and room impulse response (RIR) estimation, called BUDDy. The algorithm is rooted in Bayesian posterior sampling: it combines a likelihood model enforcing…

The purpose of speech dereverberation is to remove quality-degrading effects of a time-invariant impulse response filter from the signal. In this report, we describe an approach to speech dereverberation that involves joint estimation of…

In this paper, we present an unsupervised single-channel method for joint blind dereverberation and room impulse response estimation, based on posterior sampling with diffusion models. We parameterize the reverberation operator using a…

We present in this paper an informed single-channel dereverberation method based on conditional generation with diffusion models. With knowledge of the room impulse response, the anechoic utterance is generated via reverse diffusion using a…

Direct-to-Reverberant Ratio (DRR) is an important measure for characterizing the properties of a room. The recently proposed DRR Estimation using a Null-Steered Beamformer (DENBE) algorithm was originally tested on simulated data where…

Differences in interaural phase configuration between a target and a masker can lead to substantial binaural unmasking. This effect is decreased for masking noises with an interaural time difference (ITD). Adding a second noise with an…

Blind estimation of acoustic room parameters such as the reverberation time $T_\mathrm{60}$ and the direct-to-reverberation ratio ($\mathrm{DRR}$) is still a challenging task, especially in case of blind estimation from reverberant speech…

Reverberations are unavoidable in enclosures, resulting in reduced intelligibility for hearing impaired and non native listeners and even for the normal hearing listeners in noisy circumstances. It also degrades the performance of machine…

The multichannel Wiener filter (MWF) and its variations have been extensively applied to binaural hearing aids. However, its major drawback is the distortion of the binaural cues of the residual noise, changing the original acoustic…

Acoustic environment characterization opens doors for sound reproduction innovations, smart EQing, speech enhancement, hearing aids, and forensics. Reverberation time, clarity, and direct-to-reverberant ratio are acoustic parameters that…

Studies have shown that in noisy acoustic environments, providing binaural signals to the user of an assistive listening device may improve speech intelligibility and spatial awareness. This paper presents a binaural speech enhancement…

This work presents a noise reduction method with perceptually relevant preservation of the interaural time difference (ITD) of the residual noise in binaural hearing aids. The interaural coherence (IC) concept, previously applied to the…

A method for estimation of direct-to-reverberant ratio (DRR) using a microphone array is proposed. The proposed method estimates the power spectral density (PSD) of the direct sound and the reverberation using the algorithm \textit{PSD…

Recently, a method has been proposed to estimate the direction of arrival (DOA) of a single speaker by minimizing the frequency-averaged Hermitian angle between an estimated relative transfer function (RTF) vector and a database of…

Typical methods for binaural source separation consider only the direct sound as the target signal in a mixture. However, in most scenarios, this assumption limits the source separation performance. It is well known that the early…

Reverberation, which is generally caused by sound reflections from walls, ceilings, and floors, can result in severe performance degradation of acoustic applications. Due to a complicated combination of attenuation and time-delay effects,…

The estimation of reverberation time from real-world signals plays a central role in a wide range of applications. In many scenarios, acoustic conditions change over time which in turn requires the estimate to be updated continuously.…