相关论文: Exploiting Directionality for Millimeter-Wave Wire…

Evaluating a building's wireless performance during the building design process is a new paradigm for wireless communications and building design. This paper proposes the earliest building wireless performance (BWP) evaluation theory…

We study the maximum achievable rate of a two-hop amplified-and-forward (AF) relaying millimeter-wave (mm-wave) system, where two AF relaying schemes, i.e., half-duplex (HD) and full-duplex (FD) are discussed. By considering the two-ray…

In order to cope with the severe path loss, millimeter-wave (mm-wave) systems exploit highly directional communication. As a consequence, even a slight beam misalignment between two communicating devices (for example, due to mobility) can…

Millimeter wave (mmWave) communication by utilizing lens antenna arrays is a promising technique for realizing cost-effective 5G wireless systems with large MIMO (multiple-input multiple-output) but only limited radio frequency (RF) chains.…

The severe bandwidth shortage in conventional microwave bands has spurred the exploration of the millimeter wave (MMW) spectrum for the next revolution in wireless communications. However, there is still lack of proper channel modeling for…

The stationarity region, i.e., the area in which the statistics of a propagation channel remain constant, is an important measure of the propagation channel, and essential for efficient system design. This paper presents what is to our…

Ray tracing (RT) simulations require accurate transmitter (TX) and receiver (RX) location information from real-world measurements to accurately characterize wireless propagation behavior in an environment. Such wireless propagation…

In the US, people spend 87% of their time indoors and have an average of four connected devices per person (in 2020). As such, providing indoor coverage has always been a challenge but becomes even more difficult as carrier frequencies…

In the upcoming 5G communication, the millimeter-wave (mmWave) technology will play an important role due to its large bandwidth and high data rate. However, mmWave frequencies have higher free-space path loss (FSPL) in line-of-sight (LOS)…

Exploiting the millimeter wave (mmWave) band has recently attracted considerable attention as a potential solution to widespread deployment of device-to-device (D2D) communication challenges, namely, spectrum scarcity and interference.…

Outdoor-to-indoor (OtI) signal propagation further challenges the already tight link budgets at millimeter-wave (mmWave). To gain insight into OtI mmWave scenarios at 28 GHz, we conducted an extensive measurement campaign consisting of over…

Millimeter-wave (mmWave) massive MIMO used for access and backhaul in ultra-dense network (UDN) has been considered as the promising 5G technique. We consider such an heterogeneous network (HetNet) that ultra-dense small base stations (BSs)…

One of the key features of next generation wireless communication systems will be the use of frequencies in the range 10-100GHz (aka mmWave band) in densely populated indoor and outdoor scenarios. Due to the reduced wavelength, antenna…

Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require…

The objective of the Enhanced Mobile Broadband use case in 5G networks is to deliver high capacity access to densely populated areas, like city centres, transportation hubs or convention centres. Millimetre-wave communications are the go-to…

The use of millimeter wave (mmWave) frequencies for communication will be one of the innovations of the next generation of cellular mobile networks (5G). It will provide unprecedented data rates, but is highly susceptible to rapid channel…

IEEE 802.11ad standard uses analog beamforming for high-speed directional communication with mobile user (MU) in the millimeter wave (mmWave) spectrum. However, the lengthy beam alignment procedures involving large data packets between the…

Millimeter Wave (mmWave) massive Multiple Input Multiple Output (MIMO) systems realizing directive beamforming require reliable estimation of the wireless propagation channel. However, mmWave channels are characterized by high variability…

Exploiting multi-antenna technologies for robust beamsteering to overcome the effects of blockage and beam misalignment is the key to providing seamless multi-Gbps connectivity in millimeter-wave (mm-wave) networks. In this paper, we…

Millimeter-wave wireless networks offer high throughput and can (ideally) prevent eavesdropping attacks using narrow, directional beams. Unfortunately, imperfections in physical hardware mean today's antenna arrays all exhibit side lobes,…