相关论文: The Effect of Wedge Tip Angles on Stress Intensity…
High-strain-rate shear tests were conducted on a three-layered bonded test piece comprising a central aluminum layer with PMMA resin layers bonded on both sides. Upon calculating the displacement field and the strain field using digital…
The link between microscopic mechanisms and macroscopic behaviour, represented by the $da/dN-\Delta K$ curve, plays an increasingly important role in relating the fatigue crack growth curve required for component design to the underlying…
Integrating experimental data into simulations is crucial for predicting material behaviour, especially in fracture mechanics. Digital Image Correlation (DIC) provides precise displacement measurements, essential for evaluating strain…
This study presented a type of image processing code which is used for sharpening photoelastic fringe patterns of transparent materials in photoelastic experiences to determine the stress distribution. C-Sharp software was utilized for…
We present a curated dataset of planar displacement fields from eight fatigue crack growth experiments obtained via full-field digital image correlation (DIC). The dataset covers multiple aerospace-grade aluminium alloys, specimen…
In this study, we use the mechanism-based strain gradient plasticity theory to evaluate both crack tip dislocation density behaviour and the coupled effect of the material plastic properties and the intrinsic material length on non-linear…
Background: Full-field, quantitative visualization techniques, such as digital image correlation (DIC), have unlocked vast opportunities for experimental mechanics. However, DIC has traditionally been a surface measurement technique, and…
Reconstruction and monitoring of displacement and strain fields is an important problem in engineering. We analyze the remote and non-obtrusive methods of strain measurement based on photogrammetry and Digital Image Correlation (DIC). The…
Two-dimensional digital image correlation (2D-DIC) is a widely used optical technique to measure displacement and strain during asphalt concrete (AC) testing. An accurate 2-D DIC measurement can only be achieved when the camera's principal…
We describe the capability of a high-resolution three-dimensional digital image correlation (DIC) system specifically designed for high strain-rate experiments. Utilising open-source camera calibration and two-dimensional DIC tools within…
This Paper introduces a new Non-Contact, Optical method for displacement measurements, and strain mapping as well as comparing it to traditional Digital Image correlation (DIC) and laser interferometry measurement method. This Method…
This work presents a novel global digital image correlation (DIC) method, based on a newly developed convolution finite element (C-FE) approximation. The convolution approximation can rely on the mesh of linear finite elements and enables…
In this work, wake-tail plane interactions are investigated for a tandem wing configuration in buffet conditions using hybrid RANS/LES simulations with the Automated Zonal Detached Eddy Simulation (AZDES) method. The analyzed configuration…
The plastic deformation processes that occur in a tensily deformed High Density Polyethylene specimen were studied from full-field strain and strain rate measurements obtained by 3D DIC (Digital Image Correlation).The tensile tests were…
Digital image correlation (DIC) has become one of the most popular methods for deformation characterization in experimental mechanics. DIC is based on optical images taken during experimentation and post-test image processing. Its…
Digital Image Correlation (DIC) enables dense, time-resolved measurement of surface strain in deforming materials, providing insight into strain localization and failure mechanisms. However, the resulting strain fields are typically…
The family of multi-plane phase retrieval sensors, such as the curvature and nonlinear curvature wavefront sensors (WFS), contain tip/tilt information embedded in their signals. We have built a nonlinear curvature WFS to study different…
The yield surface in crystal plasticity can be approached from various directions during mechanical loading. We consider the competition between nanoindentation and tensile loading towards plastic yielding. For this purpose, we develop a…
Tensile tests were conducted on dual-phase high-strength steel in a Split-Hopkinson Tension Bar at a strain-rate in the range of 150-600/s and in a servo-hydraulic testing machine at a strain-rate between 10-3 and 100/s. A novel specimen…
Shock compression plate impact experiments conventionally rely on point-wise velocimetry measurements based on laser-based interferometric techniques. This study presents an experimental methodology to measure the free surface full-field…