相关论文: Neutron shielding and activation of the MASTU devi…

The Mega Amp Spherical Tokamak (MAST) is the centre piece of the UK fusion research programme. In 2010, a MAST Upgrade programme was initiated with three primary objectives, to contribute to: 1) Testing reactor concepts (in particular…

The TRIUMF Ultracold Advanced Neutron (TUCAN) collaboration has commissioned a large magnetically shielded room to be used for measuring the neutron electric dipole moment (nEDM) to a precision of $10^{-27}~e\mathrm{cm}$. The room is…

Tokamak design is inherently challenging due to several cross-competing effects which require a careful and calibrated treatment to obtain an optimal operational envelope. Incorporating physics across varied fidelities is crucial in this…

In an antiproton production (Pbar) target station of the Fermi National Accelerator Laboratory (FNAL), the secondary particles produced by bombarding a target with 120-GeV protons are shielded by a thick iron shield. In order to obtain…

The application of non-axisymmetric resonant magnetic perturbations (RMPs) to low current plasmas in the Mega Amp Spherical Tokamak (MAST) was found to be correlated with substantial drops in neutron production, suggesting a significant…

Advancements in high temperature superconducting technology have opened a path toward high-field, compact fusion devices. This new parameter space introduces both opportunities and challenges for diagnosis of the plasma. This paper presents…

A potentially important feature in a divertor design for a high-power tokamak is an extended and expanded divertor leg. The upgrade to MAST will allow a wide range of such divertor leg geometries to be produced, and hence will allow the…

Target protection is an important part of machine protection. The beam power in high-intensity accelerators is high enough that a single wayward pulse can cause serious damage. Today's high-power targets operate at the limit of available…

The IsoDAR sterile-neutrino search requires a very high intensity neutrino source. For IsoDAR, this high intensity is produced using the high neutron flux from a 60 MeV, 10 mA proton beam striking a beryllium target that floods a sleeve of…

Introduction: Neutrons are produced when photons interact with parts of the accelerator, materials in the treatment room, or the patient's body. These neutrons have significant biological effects due to their high quality factor,…

A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with…

The neutron shielding properties of high-density concrete and magnetite aggregates were evaluated using both experimental measurements and Monte Carlo simulations. Because these materials are commonly used in medical accelerator facilities,…

A passive superconducting shield was proposed earlier to realize a high-field (3-4 T) septum magnet for the Future Circular Collider. This paper presents the experimental results of a potential shield material, a NbTi/Nb/Cu multilayer…

The Neutrinos at the Main Injector (NuMI) facility at Fermilab is under construction and due to begin operations in late 2004. NuMI will deliver an intense $\nu_{\mu}$ beam of variable energy 2-20 GeV directed into the Earth at 58 mrad.…

Compared to present experiments, tokamak and stellarator reactors will be subject to higher heat loads, sputtering, erosion and subsequent coating, tritium retention, higher neutron fluxes, and a number of radiation effects. Additionally,…

Compact torus injection is considered as a high promising approach to realize central fueling in the future tokamak device. Recently, a compact torus injection system has been developed for the Experimental Advanced Superconducting Tokamak,…

An effective disruption mitigation system in a tokamak reactor should limit the exposure of the wall to localized heat losses and to the impact of high current runaway electron beams, and avoid excessive forces on the structure. We evaluate…

Neutron spectra in high-energy region between 1 and 100-MeV in the shield configuration of the anti-proton target station and a 120-GeV proton beam at Fermi National Accelerator Laboratory (Fermilab) were determined using the reaction rate…

A high pumping speed is required in neutral beam injectors to minimise re-ionisation of the neutral beams. The neutral beam injectors on MAST use titanium sublimation pumps. These pumps do not have a constant pumping speed; their pumping…

In this work, we investigate the effect of Ni concentration on several shielding properties of $Nd_{0.6}Sr_{0.4}Mn_{1-y}Ni_{y}O_{3}$ (0.00 $\leq$ y $\leq$ 0.20) perovskite ceramic for possible use as radiation shielding materials. X-ray…