相关论文: A Subspace Method for I/Q Imbalance Estimation in …

In this paper, we present a novel low-complexity scheme, which improves the performance of single-antenna multi-carrier communication systems, suffering from in-phase and quadrature (I/Q)-imbalance (IQI) at the receiver. We refer to the…

As known, receivers with in-phase and quadrature phase (I/Q) down conversion, especially direct-conversion architectures, always suffer from I/Q imbalance. I/Q imbalance is caused by amplitude and phase mismatch between I/Q paths. The…

In-phase/quadrature-phase (I/Q) imbalance is one of the most important hardware impairments in communication systems. It arises in the analogue parts of direct conversion radio frequency (RF) transceivers and can cause severe performance…

In-phase/quadrature-phase Imbalance (IQI) is considered a major performance-limiting impairment in direct-conversion transceivers. Its effects become even more pronounced at higher carrier frequencies such as the millimeter-wave frequency…

Direct-conversion transceivers are in demand, due to low implementation cost of analog front-ends. However, these transmitters or receivers introduce imperfections such as in-phase and quadrature-phase (I/Q) imbalances. In this paper, we…

Differential space time block coding (STBC) achieves full spatial diversity and avoids channel estimation overhead. Over highly frequency-selective channels, STBC is integrated with orthogonal frequency division multiplexing (OFDM) to…

Due to the non-ideality of analog components, transceivers experience high levels of hardware imperfections, like in-phase and quadrature imbalance (IQI), which manifests itself as the mismatches of amplitude and phase between the I and Q…

Differential space time block coding (STBC) achieves full spatial diversity and avoids channel estimation overhead. Over highly frequency-selective channels, STBC is integrated with orthogonal frequency division multiplexing (OFDM) to…

This paper investigates the performance of improper Gaussian signaling (IGS) for the $K$-user multiple-input, multiple-output (MIMO) interference channel (IC) with hardware impairments (HWI). HWI may arise due to imperfections in the…

Modern mobile communication receivers are often implemented with a direct-conversion architecture, which features a number of advantages over competing designs. A notable limitation of direct-conversion architectures, however, is their…

Reuse-1 systems operating in the sub-1 GHz UHF band are limited by substantial co-channel interference (CCI). In such orthogonal frequency division multiple access (OFDMA) cellular systems, the inter-sector or inter-tower interference (ITI)…

In Quantum Illumination (QI), a signal beam initially entangled with an idler beam held at the receiver interrogates a target region bathed in thermal background light. The returned beam is measured jointly with the idler in order to…

In this paper, we propose an optimization framework for rate splitting (RS) techniques in multiple-input multiple-output (MIMO) reconfigurable intelligent surface (RIS)-assisted systems, possibly with I/Q imbalance (IQI). This framework can…

In this paper, we study the achievable rate region of 1-layer rate splitting (RS) in the presence of hardware impairment (HWI) and improper Gaussian signaling (IGS) for a single-cell reconfigurable intelligent surface (RIS) assisted…

In this paper, an iterative interference cancellation (IIC) based BICM-ID receiver is designed to cancel the intrinsic interference in FBMC-QAM systems. The proposed receiver consist of an inner decoder, which combines iterative…

The degrading effect of RF impairments on the performance of wireless communication systems is more pronounced in MIMO-OFDM transmission. Two of the most common impairments that significantly limit the performance of MIMO-OFDM transceivers…

Usage of low-cost hardware in large antenna arrays and low-power wireless devices in Internet-of-Things (IoT) has led to the degradation of practical beamforming gains due to the underlying hardware impairments like…

This paper proposes schemes to improve the spectral efficiency of a multiple-input multiple-output (MIMO) broadcast channel (BC) with I/Q imbalance (IQI) at transceivers by employing a combination of improper Gaussian signaling (IGS),…

Location awareness is expected to play a significant role in 5G millimeter-wave (mmWave) communication systems. One of the basic elements of these systems is quadrature amplitude modulation (QAM), which has in-phase and quadrature (I/Q)…

Ambient backscatter communication (AmBC) offers low-cost and low-power connectivity for Internet of Things (IoT), where a backscatter tag (BT) modulates incident signals transmitted by an ambient radio frequency (RF) source and reflects…