相关论文: Transition Prediction for Scramjet Intakes Using t…
The present work studied various models for predicting turbulence in the problem of injecting a fluid microjet into the boundary layer of a turbulent flow. For this purpose, the one-equation Spalart-Allmaras (SA), two-equation k-$\epsilon$…
This paper introduces a new robust formulation for local correlation-based laminar-to-turbulent transition models. This mechanism is incorporated into Reynolds-Averaged Navier-Stokes (RANS) equations, coupled with the Spalart-Allmaras (SA)…
The simulation of hypersonic flows is computationally demanding due to large gradients of the flow variables caused by strong shock waves and thick boundary or shear layers. The resolution of those gradients imposes the use of extremely…
Accurate prediction of mixing transition induced by interfacial instabilities is vital for engineering applications, but has remained a great challenge for decades. For engineering practices, Reynolds-averaged Navier-Stokes simulation…
Most of the turbulence models in practice are based on the assumption of a linear relation between Reynolds stresses and mean flow strain rates which generally provides a good approximation in case of attached and fully turbulent flows. A…
Laminar drag reduction is a critical technology for enhancing the endurance and station-keeping capabilities of airship platforms. However, existing transport-based transition models fail to account for the premature transition induced by…
A central obstacle to understanding the route to turbulence in wall-bounded flows is that the flows are composed of complex, highly fluctuating, and strongly nonlinear states. In the case of pipe flow, models have deepened our understanding…
This study constitutes the second phase of a research endeavor aimed at evaluating the feasibility of employing Long Short-Term Memory (LSTM) neural networks as a replacement for Reynolds-Averaged Navier-Stokes (RANS) turbulence models. In…
The present study assesses RANS-based turbulence models to simulate isothermal flow in a combustor representing a constituent can combustor of can-annular configuration used in jet engines. Two-equation models (standard $k-\epsilon$,…
Turbulence modeling within the RANS equations' framework is essential in engineering due to its high efficiency. Field inversion and machine learning (FIML) techniques have improved RANS models' predictive capabilities for separated flows.…
We present direct numerical simulations (DNSs) of bypass transition over a flat plate with inlet freestream turbulence intensity levels of 0.75%, 1.5%, 2.25%, 3.0%, and 6.0%, respectively. A new definition of the transition intermittency is…
Hypersonic flow conditions pose exceptional challenges for Reynolds-Averaged Navier-Stokes (RANS) turbulence modeling. Critical phenomena include compressibility effects, shock/turbulent boundary layer interactions, turbulence-chemistry…
Flow past a high-lift low-pressure turbine (LPT) blade in a cascade could be quite complex as phenomena like separation and transition are often involved. For a highly loadedT106A blade at a high incidence and relatively low Reynolds…
The integration of interpretability and generalisability in data-driven turbulence modelling remains a fundamental challenge for computational fluid dynamics applications. This study yields a generalisable advancement of the $k$-$\omega$…
Hypersonic boundary layer transition using high-order methods for direct numerical simulations (DNS) is largely unexplored, although a few references exist in the literature. Experimental data in the hypersonic regime are scarce, while…
This experimental and numerical study examines transition to turbulence for a Cone-Cylinder-Flare geometry at Mach 7 and across a broad Reynolds number range. The focus is set on both attached boundary layers and separated shock-boundary…
Using the Lagrangian transport of momentum, the Reynolds shear stress can be expressed in terms of basic turbulence parameters. In this view, the Reynolds stress gradient represents the lateral transport of streamwise momentum, balanced by…
This study aims to enhance the generalizability of Reynolds-averaged Navier-Stokes (RANS) turbulence models, which are crucial for engineering applications. Classic RANS turbulence models often struggle to predict separated flows…
We introduce a minimal model of energy transfer through scales to describe, at a qualitative level, the subcritical transition between laminar and turbulent flows, viewed in a statistical physics framework as a discontinuous absorbing phase…
The transitional boundary layer flow over a flat plate is investigated. The boundary layer flow is known to develop unstable Tollmien-Schlichting waves above a critical value of the Reynolds number. However, it is also known that this…