相关论文: Controlled pore formation on mesoporous single cry…
A comparison of porous structures formed from silicon (Si) wafers with different resistivities has been reported here based on the morphological studies carried out using scanning electron microscope (SEM). The porous Si samples have been…
Porous silicon (p-Si), prepared by two routes (metal induced etching (MIE) and laser induced etching (LIE)) have been studied by comparing the observed surface morphologies using SEM. A uniformly distributed smaller (submicron sized) pores…
Porous silicon (PSi) layers has been prepared in this work via photoelectrochemical (PEC) etching process of an n type silicon wafers of two resistivities (3.5 ohm.cm and 0.02 ohm.cm) in hydrofluoric (HF) acid of 24.5 precent…
A convenient method has been developed to thin electron beam fabricated Silicon nanopillars under controlled surface manipulation by transforming the surface of the pillars to an oxide shell layer followed by the growth of sacrificial…
We present a design and a top-down fabrication method for realizing diamond nanowires in both bulk single crystal and polycrystalline diamond. Numerical modeling was used to study coupling between a Nitrogen Vacancy (NV) color center and…
Thin membranes are highly sought-after for nanopore-based single-molecule sensing and fabrication of such membranes becomes challenging in the \lesssim10 nm thickness regime where a plethora of useful molecule information can be acquired by…
It is shown that porous spherical particles can be obtained via the freezing of silica nanoparticle aqueous suspensions emulsified in a continuous oil phase. After two freeze-thaw cycles, nanoparticles turn aggregated into flocculated…
We report in-situ synthesis of iron oxide particles inside silicon nitride nanopores via a chemical reaction, monitored by current readout. Nanopores were formed by electroporation on glass chips (diameters from 1.7 to 11.3 nm),…
Many biological materials exhibit a multiscale porosity with small, mostly nanoscale pores as well as large, macroscopic capillaries to simultaneously achieve optimized mass transport capabilities and lightweight structures with large inner…
A cost effectively method to fabricate nanopores in silicon by only using the conventional wet-etching technique is developed in this research. The main concept of the proposed method is a two-step etching process, including a premier…
Nanoporosity in silicon results in an interface-dominated mechanics, fluidics and photonics that are often superior to the ones of the bulk material. However, their active control, e.g. as a response to electronic stimuli, is challenging…
A new method of introducing nanopores with spongy morphology during fabrication of size and pitch controlled flexible silicon microwires (SiMWs) in wafer scale is presented using nanosphere lithography technique in addition to metal…
We have fabricated disordered superconducting nanowires of molybdenium silicide. A molybdenium nanowire is first deposited on top of silicon, and the alloy is formed by rapid thermal annealing. The method allows tuning of the crystal growth…
Nanoporosity in silicon leads to completely new functionalities of this mainstream semiconductor. A difficult to assess mechanics has however significantly limited its application in fields ranging from nanofluidics and biosensorics to drug…
We demonstrate the fabrication of individual nanopores in hexagonal boron nitride (hBN) with atomically precise control of the pore size. Previous methods of pore production in other 2D materials create pores of irregular geometry with…
Vertically aligned silicon micro/nanowire arrays of different sizes have been synthesized by combining the modified metal-assisted chemical etching (MACE) and reactive ion etching (RIE) methods. This is a novel lithography-free method to…
Metal nanoparticles are the most frequently used nanostructures in plasmonics. However, besides nanoparticles, metal nanowires feature several advantages for applications. Their elongation offers a larger interaction volume, their…
The observation that the thermal conductivity of single-crystalline silicon nanowires with diameter on the length scale of 25 nm is lower than that of bulk material by two orders of magnitude has attracted the interest onto silicon as a…
Rapid and reproducible assembly of aligned nanostructures on a wafer-scale is a crucial, yet one of the most challenging tasks in the incorporation of nanowires into integrated circuits. We present the synthesis of a periodic nanochannel…
Controlled formation of porous silicon has been of primary importance for numerous landmark applications such as light emitting sources, sensors, actuators, drug delivery systems, and energy storage applications. Frequently explored methods…