相关论文: Characterization of a commercial, front-illuminate…

The average pixel distance as well as the relative orientation of an array of 6 CCD detectors have been measured with accuracies of about 0.5 nm and 50 $\mu$rad, respectively. Such a precision satisfies the needs of modern crystal…

Obtaining accurate photometry of bright stars from the ground remains tricky because of the danger of overexposure of the target and/or lack of suitable nearby comparison star. The century-old method of the objective wire mesh used to…

We characterize the response of a novel 250 $\mu$m thick, fully-depleted Skipper Charged-Coupled Device (CCD) to visible/near-infrared light with a focus on potential applications for astronomical observations. We achieve stable,…

The Teledyne COSMOS-66 is a next-generation CMOS camera designed for astronomical imaging, featuring a large-format sensor ($8120 \times 8120$ pixels, each $10 \mu m$), high quantum efficiency, high frame rates, and a correlated…

A high temperature superconducting detector was fabricated to capture the thermal images in room temperature background. The detector was made of YBa2Cu3O7-{\delta} (YBCO) superconducting thin film deposited on an Yttria Stabilized Zirconia…

Balloon-borne telescopes present unique thermal design challenges which are a combination of those present for both space and ground telescopes. At altitudes of 35-40 km, convection effects are minimal and difficult to characterize.…

ARIES Baker-Nunn Schmidt telescope project is converting a Baker-Nunn satellite tracking camera for Astronomical research. Original Baker-Nunn camera produces an extremely large (5X30 degree) curved focal plane at the prime focus for…

An optimal maximum-likelihood technique for computing point-source image centroids from many, slightly offset, CCD frames is presented. The method is especially useful for measuring stellar proper motions from data taken with the Wide Field…

Optical interferometry has been successful at achieving milliarcsecond resolution on bright stars. Imaging performance can improve greatly by increasing the number of baselines, which has motivated proposals to build large (~ 100 m) optical…

We present the results of integration and characterization of the SPIDER instrument after the 2013 pre-flight campaign. SPIDER is a balloon-borne polarimeter designed to probe the primordial gravitational wave signal in the degree-scale…

The Pan-STARRS telescope consists of an array of smaller mirrors viewed by a Gigapixel arrays of CCDs. These focal planes employ Orthogonal Transfer CCDs (OTCCDs) to allow on-chip image stabilization. Each OTCCD has advanced logic features…

We describe test observations made with a customized 640 x 512 pixel Indium Gallium Arsenide (InGaAs) prototype astronomical camera on the 100" DuPont telescope. This is the first test of InGaAs as a cost-effective alternative to HgCdTe for…

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a balloon-borne far-infrared telescope that will survey star formation history over cosmological time scales to improve our understanding of why the star formation…

We present a new method to measure the vertical aerosol optical depth (VAOD) during clear nights using a wide-field imager - a CCD camera with a photographic lens on an equatorial mount. A series of 30-second exposures taken at different…

The design of electron multiplying CCD cameras require a very different approach from that appropriate for slow scan CCD operation. This paper describes the main problems in using electron multiplying CCDs for high-speed, photon counting…

The Swift X-ray Telescope (XRT) focal plane camera is a front-illuminated MOS CCD, providing a spectral response kernel of 144 eV FWHM at 6.5 keV. We describe the CCD calibration program based on celestial and on-board calibration sources,…

We present the characterization of the CCD system developed for the ADFOSC instrument on the 3.6m Devasthal Optical Telescope (DOT). We describe various experiments performed to tune the CCD controller parameters to obtain optimum…

We describe SPIDER, a balloon-borne instrument to map the polarization of the millimeter-wave sky with degree angular resolution. Spider consists of six monochromatic refracting telescopes, each illuminating a focal plane of large-format…

We present a scheme for estimating the noise-equivalent temperature difference (NETD) of frequency upconversion detectors (UCDs) that detect mid-infrared (MIR) light. In particular, this letter investigates the frequency upconversion of a…

The design and implementation of astronomical cameras based on the large-format CCD and CMOS detectors is described in this paper. The Dinacon-5 controller is used for work with the CCDs and to achieve high performance and low noise. A new…