相关论文: Demonstrator of the Belle II Online Tracking and P…
The new Belle II experiment at the asymmetric $e^+ e^-$ accelerator SuperKEKB at KEK in Japan is designed to deliver a peak luminosity of $8\times10^{35}\text{cm}^{-2}\text{s}^{-1}$. To perform high-precision track reconstruction, e.g. for…
We present an FPGA-based online data reduction system for the pixel detector of the future Belle II experiment. The occupancy of the pixel detector is estimated at 3 %. This corresponds to a data output rate of more than 20 GB/s after zero…
The physics goals the Belle II experiment require an exceptionally good alignment of all the components of the Belle II tracker. The Belle II tracker is composed of the DEPFET based pixel silicon detector, four layers of double sided…
DEPleted Field Effect Transistor (DEPFET) active pixel detectors combine a first amplification stage with a fully depleted sensor in one single device, resulting in a very good signal-to-noise ratio even for thin sensors. DEPFET pixels are…
In 2019 the Belle II experiment started data taking at the asymmetric SuperKEKB collider (KEK, Japan) operating at the Y(4S) resonance. Belle II will search for new physics beyond the Standard Model by collecting an integrated luminosity of…
The Belle~II experiment is designed to search for physics beyond the Standard Model by investigating rare decays at the SuperKEKB \(e^{+}e^{-}\) collider. Owing to the significant beam background at high luminosity, the data acquisition…
The Belle II experiment, located at the SuperKEKB collider at the high-energy research facility KEK in Tsukuba, Japan, started operation in 2018. Compared to the predecessor experiment Belle, Belle II plans to increase the peak luminosity…
The Belle II experiment at the SuperKEKB collider at KEK, Tsukuba, Japan has successfully started taking data with the full detector in March 2019. Belle II is a luminosity frontier experiment of the new generation to search for physics…
The SuperKEKB accelerator and the Belle II experiment constitute the second-generation asymmetric energy B-factory. SuperKEKB has recently set a new world record in instantaneous luminosity, which is anticipated to further increase during…
The Belle~II experiment operates at high luminosity, where an increasing beam-induced background imposes stringent demands on the hardware Level-1 trigger system, which must operate under tight latency and bandwidth constraints. To achieve…
DEPFET active pixel sensors are a well-developed technology for vertex detectors at future colliders. Extensive test beam campaigns have proven the excellent performance of these devices, and their radiation hardness has been thoroughly…
The Silicon Vertex Detector of Belle II is a state-of-the-art tracking and vertexing system based on double-sided silicon strip sensors, designed and fabricated by a large international collaboration in the period 2012--2018. Since 2019 it…
The Belle II experiment currently under construction at the $e^+e^-$-collider SuperKEKB in Japan is designed to explore new physics beyond the standard model with an approximately 50 times larger data sample compared to its predecessor. The…
The Belle II detector at the SuperKEKB accelerator has a level 1 trigger implemented in field-programmable gate arrays. Due to the high luminosity of the beam, a trigger that effectively rejects beam induced background is required. A three…
For the Belle II experiment at KEK (Tsukuba, Japan) the KEKB accelerator was upgraded to deliver a 40 times larger instantaneous luminosity than before, which requires an increased radiation hardness of the detector components. As the…
The silicon vertex detector (SVD) is installed at the heart of the Belle II experiment, taking data at the high-luminosity $B$-Factory SuperKEKB since 2019. The detector has shown a stable and above-99\% hit efficiency, with a large…
The DESY II Test Beam Facility is a key infrastructure for modern high energy physics detector development, providing particles with a small momentum spread in a range from 1 to 6 GeV to user groups e.g. from the LHC experiments and Belle…
The Belle II experiment at the SuperKEKB $e^{+}e^{-}$ collider in KEK, Japan, started physics data-taking with a complete detector from early 2019 with the primary physics goal of probing new physics in heavy quark and lepton decays. An…
The Belle II experiment will go into operation at the upgraded SuperKEKB collider in 2016. SuperKEKB is designed to deliver an instantaneous luminosity $\mathcal{L}=8\times10^{35}\,\mathrm{cm}^{-2}\,\mathrm{s}^{-1}$. The experiment will…
The Pixel Detector of the ATLAS experiment has shown excellent performance during the whole Run-1 of LHC. Taking advantage of the long shutdown, the detector was extracted from the experiment and brought to surface, to equip it with new…