相关论文: Online Rotor Resistance Adaptation Of Induction Mo…

The paper deals with the modelling and control of a double winded induction generator. The controlled process is an induction generator with distinct excitation winding. At the generator terminal is connected a load (electrical consumer).…

A major limitations for many heat engines is that their functioning demands on-line control, and/or an external fitting between environmental parameters (e.g. temperatures of thermal baths) and internal parameters of the engine. We study a…

We propose a novel adaptive reinforcement learning control approach for fault tolerant control of degrading systems that is not preceded by a fault detection and diagnosis step. Therefore, \textit{a priori} knowledge of faults that may…

An experimental study on the design of counter-rotating axial-flow fans was carried out. The fans were designed using an inverse method. In particular, the system is designed to have a pure axial discharge flow. The counter-rotating fans…

Interior permanent magnet synchronous machine drives are widely employed in electric traction systems and various industrial processes. However, prolonged exposure to high temperatures while operating can demagnetize the permanent magnets…

The focus of this paper is an integrated, fault-tolerant vehicle supervisory control algorithm for the overall stability of ground vehicles. Vehicle control systems contain many sensors and actuators that can communicate with each other…

Direct torque control is considered as one of the most efficient techniques for speed and/or position tracking control of induction motor drives. However, this control scheme has several drawbacks: the switching frequency may exceed the…

The voltage received by each customer connected to a power distribution line with local controllers (inverters) is regulated to be within a desired margin through a class of slope-restricted controllers, known conventionally as \emph{droop}…

In multi-point contact systems, precise force control is crucial for achieving stable and safe interactions between robots and their environment. Thus, we demonstrate an admittance controller with auto-tuning that can be applied for these…

The number of electrified powertrains is ever increasing today towards a more sustainable future; thus, it is essential that unwanted failures are prevented, and a reliable operation is secured. Monitoring the internal temperatures of…

This paper solves the problem of regulating the rotor speed tracking error for wind turbines in the full-load region by an effective robust-adaptive control strategy. The developed controller compensates for the uncertainty in the control…

Dynamic induction control is a wind farm flow control strategy that utilises wind turbine thrust variations to accelerate breakdown of the aerodynamic wake and improve downstream turbine performance. However, when floating wind turbines are…

Flow and storage volume regulation is essential for the adequate transport and management of energy resources in district heating systems. In this letter, we propose a novel and suitably tailored -- decentralized -- adaptive control scheme…

In this paper, a new fault tolerant dc-ac converter-fed induction motor drive is proposed to maintain motor as close as possible to its desired normal operation under open- and short-circuit switch failures. The operational principles for…

This paper proposes an inverse design scheme for resistive heaters. By adjusting the spatial distribution of a binary electrical resistivity map, the scheme enables objective-driven optimization of heaters to achieve pre-defined…

This paper proposes a framework for adaptively learning a feedback linearization-based tracking controller for an unknown system using discrete-time model-free policy-gradient parameter update rules. The primary advantage of the scheme over…

This article proposes a transfer reinforcement learning (RL) based adaptive energy managing approach for a hybrid electric vehicle (HEV) with parallel topology. This approach is bi-level. The up-level characterizes how to transform the…

An adaptive funnel control method is considered for the regulation of the output for a class of nonlinear infinite-dimensional systems on real Hilbert spaces. After a decomposition of the state space and some change of variables related to…

Optimal control of magnetizing current for minimizing induction motor power losses during load torque step change was developed. Obtained strategy has feedback form and is exactly optimal of ideal speed controller performance and absence of…

We present a control strategy that applies inverse dynamics to a learned acceleration error model for accurate multirotor control input generation. This allows us to retain accurate trajectory and control input generation despite the…