相关论文: Numerical evaluation of AC losses in an HTS insert…

The temperature dependence of AC susceptibility (ACS) has been measured for a very high-quality plate-like slightly overdoped YBCO single crystal for different frequencies and AC magnetic field amplitudes. Frequency dependence of the ACS is…

For finite element (FE) analysis of no-insulation (NI) high-temperature superconducting (HTS) pancake coils, the high aspect ratio of the turn-to-turn contact layer (T2TCL) leads to meshing difficulties which result in either poor quality…

Development of energy-efficient fast cycling accelerator magnets is critical for the next generation of proton rapid cycling synchrotrons (RCS) for neutrino research and booster accelerators of future muon colliders. We see a unique…

Study of AC losses in superconducting wires and tapes is usually restricted by consideration of applied sinusoidal currents and/or magnetic fields. However, currents in electric power systems contain a wide variety of harmonics. The…

We report the results of a study of the magnetization losses in experimental multifilament, as well as control (uniform), coated superconductors exposed to time-varying magnetic field of various frequencies. Both the hysteresis loss,…

Many applications of ReBCO coated conductors contain stacks of pancake coils. In order to reduce their high AC loss, it is necessary to understand the loss mechanisms. In this article, we measure and simulate the AC loss and the critical…

Many large-scale applications require electromagnetic modelling with extensive numerical computations, such as magnets or 3-dimensional (3D) objects like transposed conductors or motors and generators. Therefore, it is necessary to develop…

Spin-orbit torque arising from the spin-orbit-coupled surface states of topological insulators enables current-induced control of magnetization with high efficiency. Here, alternating-current (AC) driven magnetization reversal is…

The superconducting current breaking effect at pulsed field magnetization of HTS annuli was carefully investigated. It is proposed the simple model for qualitative description of this process. In particular, it is shown the appearance of a…

The CMS magnetic system consists of a super-conducting solenoid coil, 12.5 m long and 6 m free bore diameter, and of an iron flux-return yoke, which includes the central barrel, two end-caps and the ferromagnetic parts of the hadronic…

In this paper, a microscopic theory of magnetic-interaction-induced pairing in superconductivity of high temperature superconductors (HTSC) was developed on the basis of four idealized assumptions: (1) only a small number of electrons(or…

We propose an analytical model devoted to explain the anisotropy of the electrical resistance observed below the critical temperature in granular high-Tc superconductors submitted to a magnetic field H. Reported experimental results…

The influence of surface treatment on AC loss in melt-processed quasi-single crystal HTS was investigated with resonance oscillations technique. We have found that amplitude dependencies of AC loss on magnetic field amplitude become rather…

High temperature superconducting (HTS) bulks can be magnetized to become powerful trapped field magnets (TFMs), which are promising for high-performance electrical applications. To magnetize such TFMs, pulsed field magnetization (PFM) is…

High-temperature superconducting (HTS) coated conductors (CCs) can be wound into no-insulation (NI) coils, in which electrical current can partially bypass local normal zones via turn-to-turn contact layers (T2TCLs). Accurate…

The current distribution and the AC loss in a composite superconducting tape containing a layer from magnetic material is calculated and compared with experiments, showing a very good agreement. The situations of an alternating uniform…

Protecting a high temperature superconducting (HTS) magnet from a quench event is a challenging task. Because of the slow normal zone propagation velocity, the long reliable quench detection method by directly monitoring coil voltage may…

For a superconductor to be able to receive an external magnetic field, there must be a vacant energy state in the superconductor to receive the energy associated with the field. For a small range of energies near that of the critical…

SMES using high critical temperature superconductors are interesting for high power pulsed sources. Operation at temperatures above 20 K makes cryogenics easier, enhances stability and improves operation as pulsed power source. In the…

Surface distributions of two level system (TLS) defects and magnetic vortices are limiting dissipation sources in superconducting quantum circuits. Arrays of flux-trapping holes are commonly used to eliminate loss due to magnetic vortices,…