相关论文: Roughness Tolerance Studies for the Undulator Beam…
In LCLS-II, after acceleration and compression and just before entering the undulator, the beam passes through 2.5 km of 24.5 mm (radius) stainless steel pipe. The bunch that passes through the pipe is extremely short---with an rms of 8 um…
The impact of wall roughness on fully developed laminar pipe flow is investigated numerically. The roughness is comprised of square bars of varying size and pitch. Results show that the inverse relation between the friction factor and the…
In free electron laser facilities, almost every kind of device will generate wakefield when an electron beam passes through it. Most of the wakefields are undesired and have a negative effect on the electron beam, which means a decrease of…
For LCLS-II we estimate the power of radiated wakefields generated in the SRF cavities (including the 3rd harmonic cavities) and in the end transitions. Much of this power will pass through and reflect in the strings of cryomodules that…
In this work we explore the influence of random surface roughness on the cantilever sensitivity to respond to curvature changes induced by changes in surface stress. The roughness is characterized by the out-of-plane roughness amplitude w,…
The wake topology developing behind a wall-mounted square cylinder in a turbulent boundary layer has been investigated using a high-resolution large-eddy simulation (LES). The boundary-layer thickness at the obstacle location is fixed, the…
Direct numerical simulations of turbulent pipe flow with transverse wall oscillation (WWO) and with no transverse wall oscillation (NWO) are carried out at friction Reynolds numbers Re{\tau} = 170, 360, and 720. The period and amplitude of…
Boundary layer flow over a realistic porous wall might contain both the effects of wall-permeability and wall-roughness. These two effects are typically examined in the context of a rough-wall flow, i.e., by defining a ``roughness'' length…
Walls in discrete element method simulations of granular flows are sometimes modeled as a closely packed monolayer of fixed particles, resulting in a rough wall rather than a geometrically smooth wall. An implicit assumption is that the…
In this study, we investigate the coupling effects of roughness and wall shear in an annular centrifugal Rayleigh-B\'enard convection (ACRBC) system, where two cylinders rotate with different angular velocities. Two-dimensional direct…
In the last decade, progresses in additive manufacturing (AM) have paved the way for optimized heat exchangers, whose disruptive design will depend on predictive numerical simulations. Typical AM rough surfaces show limited resemblance to…
In accelerator projects involving the use of very short bunches, such as the Linac Coherent Light Source (LCLS)-where the rms bunch length in the undulator section is 30 micron-, it appears that even submicron imperfections in the beam tube…
Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can…
Molecular dynamics simulations of Lennard-Jones systems are performed to study the effects of dissolved gas on liquid-wall and liquid-gas interfaces. Gas enrichment at walls is observed which for hydrophobic walls can exceed more than two…
The origin of wall shear-stress fluctuations in wall turbulence was studied through energy dissipation at the wall. While confirming the universality in wall dissipation at small inner scales, the dissipation at larger scales is a…
Direct Numerical Simulations (DNS) of turbulent channel flow at a shear Reynolds number of $Re_{*}=360$ for Newtonian and Herschel-Bulkley fluids in smooth and rough channels has been performed. The rough surface was made of irregular…
We study laminar, transitional and turbulent flow in wavy pipes using direct numerical simulations for bulk Reynolds numbers between 1-5300. Flow behaviors are analyzed in terms of the friction factor f and mean velocity statistics for…
The wake of an isolated model-scale wind turbine is analysed in a set of inflow conditions having freestream turbulence intensity between 3 % and 12 %, and integral time scales in the range of 0.1 to 10 times the convective timescale based…
The effect of the variations of the permeability tensor on the close-to-the-wall behaviour of a turbulent channel flow bounded by porous walls is explored using a set of direct numerical simulations. It is found that the total drag can be…
This study investigates how variations in freestream turbulence (FST) and the thrust coefficient ($C_T$) influence wind turbine wakes. Wakes generated at $C_T \in \{0.5, 0.7,0.9\}$ are exposed to turbulent inflows with varying FST intensity…