相关论文: Gain Stabilization of SiPMs

This paper presents the design and robustness analysis of fractional and integer order PID controllers for the control of a non-linear industrial process in the presence of parametric uncertainness and external disturbances. The nonlinear…

The output impedance matrix of a grid-connected converter plays an important role in analyzing system stability. Due to the dynamics of the DC-link control and the phase locked loop (PLL), the output impedance matrices of the converter and…

The SiPM-on-tile technology, consisting of plastic scintillator tiles with typical sizes of a few cm$^2$ mounted on top of SiPMs, has been developed within the CALICE collaboration to enable automatized mass production of active elements…

The PID controller remains the most widely adopted control architecture, with groundbreaking success across extensive implications. However, optimal parameter tuning for PID controller remains a critical challenge. Existing theories…

Transimpedance amplifiers (TIAs) are essential in sensor electronics, converting input currents into output voltages. Conventional TIAs utilize fixed-gain resistors, which saturate under high input currents and consequently result in…

We investigate the effects of dichotomous noise added to a classical harmonic oscillator in the form of stochastic time-dependent gain and loss states, whose durations are sampled from two distinct exponential waiting time distributions.…

The last decade has increasingly seen the use of silicon photomultipliers (SiPMs) instead of photomultiplier tubes (PMTs). This is due to various advantages of the former on the latter like its smaller size, lower operating voltage, higher…

Realistic multiport interferometers (beamsplitter meshes) are sensitive to component imperfections, and this sensitivity increases with size. Self-configuration techniques can be employed to correct these imperfections, but not all…

In this paper, we discuss various topological and metrical aspects of the set of stabilizing static feedback gains for multiple-input-multiple-output (MIMO) linear-time-invariant (LTI) systems, in both continuous and discrete-time.…

An in-house Seebeck coefficient measurement system has been developed which can measure the thermoemf (Seebeck coefficient) of the sample, under large temperature difference, in the temperature range 300-600 K. Unlike majority of reported…

This paper investigates the design of a robust output-feedback linear parameter-varying (LPV) gain-scheduled controller for the speed regulation of a surface permanent magnet synchronous motor (SPMSM). Motor dynamics is defined in the…

This paper is an extension of the author's recent research in which only buck converters were analyzed. Similar analysis can be equally applied to other types of converters. In this paper, a unified model is proposed for buck, boost, and…

Thermal transient measurement based on source-drain voltage is a standard method to characterize thermal properties of silicon semiconductors but is doubtful to be directly applied to silicon carbide (SiC) devices. To evaluate its…

This article presents the development of a cost-effective and efficient electronic module for silicon photomultipliers (SiPM). The electronic module combines essential functionalities, such as a high voltage power supply, a preamplifier,…

Intensity of positron reemission from a metal is related to its work function. This property is dependent on temperature and can be modified with temperature control. In this article a simple model is proposed to explain and predict the…

The operation of resistive and phase-change memory (RRAM and PCM) is controlled by highly localized self-heating effects, yet detailed studies of their temperature are rare due to challenges of nanoscale thermometry. Here we show that the…

A Proportional- Integral- Derivative (PID) controller is required to bring a system back to the stable operating region as soon as possible following a disturbance or discrepancy. For successful operation of the PID controller, it is…

An SRAM Physical Unclonable Function (PUF) can distinguish SRAM modules by analyzing the inherent randomness of their start-up behavior. However, the effectiveness of this technique varies depending on the design and fabrication of the SRAM…

The high frequency primary power standard is univocally realized by means of a coaxial microcalorimeter, at least up to 40 GHz. The coaxial microcalorimeter is a broadband measurement system adjusted for effec-tive efficiency measurement of…

Strongly correlated insulators, such as Mott or charge-transfer insulators, exhibit a strong temperature dependence in their resistivity. Consequently, self-heating effects can lead to electrothermal instabilities in planar thin film…