相关论文: Narrow-bandwidth solar upconversion: design princi…
Photovoltaic materials are recognized for their potential as sustainable energy sources that enable the conversion between light and electrical energy. However, solar cells have been unable to surpass the theoretical limit of 32%, known as…
The Shockley-Queisser limit is one of the most fundamental results in the field of photovoltaics. Based on the principle of detailed balance, it defines an upper limit for a single junction solar cell that uses an absorber material with a…
Maximum efficiency of ideal single-junction photovoltaic (PV) cells is limited to 33% (for one sun illumination) by intrinsic losses such as band edge thermalization, radiative recombination, and inability to absorb below-bandgap photons.…
The intermediate band solar cell (IBSC) and quantum ratchet solar cell (QRSC) have the potential to surpass the efficiency of standard single-junction solar cells by allowing sub-gap photon absorption through states deep inside the band…
The theoretical maximum efficiency of a solar cell is typically characterized by a detailed balance of optical absorption and emission for a semiconductor in the limit of unity radiative efficiency and an ideal step-function response for…
To absorb the photons below the band-gap energy effectively, we proposed a quantum dot (QD) photocell modeled by multi-level system for the quantum yields and photo-to-charge efficiency limits. The theoretical results show the quantum…
The Shockley-Queisser limit describes the maximum solar energy conversion efficiency achievable for a particular material and is the standard by which new photovoltaic technologies are compared. This limit is based on the principle of…
Improving the conversion efficiency of solar energy to electricity is most important to mankind. For single-junction photovoltaic solar-cells, the Shockley-Queisser thermodynamic efficiency limit is extensively due to the heat dissipation,…
The Shockley-Queisser (SQ) limit provides a convenient metric for predicting light-to-electricity conversion efficiency of a solar cell based on the band gap of the light-absorbing layer. In reality, few materials approach this radiative…
Light trapping in sub-wavelength semiconductor nanowires (NWs) offers a promising approach to simultaneously reducing material consumption and enhancing photovoltaic performance. Nevertheless, the absorption efficiency of a NW, defined by…
Upconversion of sub-band-gap photons constitutes a promising way for improving the efficiency of silicon-based solar cells beyond the Shockley-Queisser limit. 1500 to 980 nm upconversion by trivalent erbium ions is well-suited for this…
We present a multiscale approach for modeling an intermediate-band solar cell based on a GaAs-GaAlAs quantum dot superlattice of cubic symmetry. Our framework combines high-accuracy theoretical calculations of the superlattice band…
The ideal solar cell conversion efficiency limit known as the Shockley-Queisser (SQ) limit, which is based on a detailed balance between absorption and radiation, has long been a target for solar cell researchers. While the theory for this…
Light management is of great importance to photovoltaic cells, as it determines the fraction of incident light entering the device. An optimal pn-junction combined with an optimal light absorption can lead to a solar cell efficiency above…
Solar photons possessing energy less than the band-gap of a single-junction solar cell can be utilized via the up-conversion (UC) of two or more photons, resulting in the emission of a single above-bandgap photon. Due to the non-linear…
The Shockley-Queisser (SQ) limit, introduced by W. Shockley and H. J. Queisser in 1961, is the most well-established fundamental efficiency limit for single-junction photovoltaic solar cells. For widely-studied semiconductors such as Si,…
Single junction Si solar cells dominate photovoltaics but are close to their efficiency limits. This paper presents ideal limiting efficiencies for tandem and triple junction multijunction solar cells subject only to the constraint of the…
The fundamental efficiency limit of a single bandgap solar cell is about 31% at one sun with a bandgap of about Eg = 1.35 eV (1), determined by the trade-off of maximising current with a smaller bandgap and voltage with a larger bandgap.…
The Shockley and Queisser limit, a well-known efficiency limit for a solar cell, is based on unrealistic physical assumptions and its maximum limit is seriously overestimated. To understand the power loss mechanisms of record-efficiency…
The purpose of this work is to look for a practical structure for application of quantum dots (QD) in solar cells in order to enhance sub-band gap photon absorption. We focuse on a stack of strain-compensated GaSb/GaAs type-II QDs. We…