相关论文: Aluminum oxide n Si field effect inversion layer s…

Here, we report the first experimental demonstration of InN nanowire solar cells deposited by RF sputtering with a bandgap energy of 1.78 eV. By adding an amorphous Si (a-Si) buffer to the n-InN/p-Si structure, we have improved the…

We report the influence of the AlN interlayer thickness (0-15 nm) on the photovoltaic properties of Al0.37In0.63N on Si heterojunction solar cells deposited by radio frequency sputtering. The poor junction band alignment and the presence of…

An approach is presented to modify the WF of solution-processed sol-gel derived ZnOover an exceptionally wide range of more than 2.3 eV. This approach relies on the formation of dense and homogeneous self-assembled monolayers based on…

We have demonstrated a high-performance low temperature solution processed electron selective contact consisting of 10 at% antimony doped tin oxide (ATO) and the neutral polymer polyethylenimine (PEI). Inverted organic photovoltaics (OPVs)…

Modern electronic devices are unthinkable without the well-controlled formation of interfaces at heterostructures. These often involve at least one amorphous material. Modeling such interfaces poses a significant challenge, since a…

The P+ {\alpha}-Si /N+ polycrystalline solar cell is molded using the AMPS-1D device simulator to explore the new high efficiency thin film poly-silicon solar cell. In order to analyze the characteristics of this device and the thickness of…

Nano-scaled metallic or dielectric structures may provide various ways to trap light into thin-film solar cells for improving the conversion efficiency. In most schemes, the textured active layers are involved into light trapping structures…

Aluminum Indium Nitride (AlInN) alloys offer great potential for photovoltaic devices thanks to their wide direct bandgap energy that covers the solar spectrum from 0.7 eV (InN) to 6.2 eV (AlN), and their superior resistance to high…

This study explores the impact of an optimized amorphous silicon (a-Si) buffer layer on AlxIn1-xN-on-Si(100) heterojunction solar cells, with Al content varying from 0% (InN) to 55%. The buffer layer improves the structural quality of the…

A detailed investigation of the functionality of inverted organic photovoltaics (OPVs) using bare Ag contacts as top electrode is presented. The inverted OPVs without hole transporting layer (HTL) exhibit a significant gain in hole carrier…

Inducing an inversion layer in organic semiconductors is a highly nontrivial, but critical, achievement for producing organic field-effect transistor (OFET) devices, which rely on the generation of inversion, accumulation, and depletion…

One of the remaining obstacles to approaching the theoretical efficiency limit of crystalline silicon (c-Si) solar cells is the exceedingly high interface recombination loss for minority carriers at the Ohmic contacts. In ultra-thin-film…

We show that the highly conductive polymer poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) can successfully be applied as a hole selective front contact in silicon heterojunction (SHJ) solar cells. In combination with a…

Multijunction solar cells in a tandem configuration could further lower the costs of electricity if crystalline Si (c-Si) is used as bottom cell. However, for direct monolithic integration on c-Si, only a restricted number of top and bottom…

The ideal band gap for a photovoltaic active layer for the solar spectrum is around 1.3 eV. However oxides with such values are rare. One of the most studied oxides to date as a photovoltaic active layer is the cuprous oxide Cu2O. Its band…

Thin-film solar cells based on kesterite (Cu2ZnSnSe4) material are a promising alternative for photovoltaic devices due to their composition consisting of earth abundant elements, ease of production at a relatively low temperatures and…

In Si nanowire (SiNW) solar cells enhanced light confinement property in addition to decoupling of charge carrier collection and light absorption directions plays a significant role to resolve the draw backs of bulk Si solar cells. In this…

It is known that silicon is an indirect band gap material, reducing its efficiency in photovoltaic applications. Using surface plasmons in metallic nanoparticles embedded in a solar cell has recently been proposed as a way to increase the…

The p-type amorphous/ n-type crystalline silicon (P+ a-Si/N+ c-Si) heterojunction was simulated for developing the solar cells with high conversion efficiency and low cost. The characteristic of such cells with different work function of…

The photovoltaic effect is one of the fundamental light-matter interactions in light energy harvesting. In conventional photovoltaic solar cells, the photogenerated charge carriers are extracted by the built-in electric field of a PN…