相关论文: Superconducting microstrip amplifiers with sub-Kel…
We present the design, realization and performance of a three-axis vector nano Superconducting QUantum Interference Device (nanoSQUID). It consists of three mutually orthogonal SQUID nanoloops that allow distinguishing the three components…
An amplifier combining noise performances as close as possible to the quantum limit with large bandwidth and high saturation power is highly desirable for many solid state quantum technologies such as high fidelity qubit readout or high…
We propose a new type of cryogenic current amplifiers, in which low-frequency power spectrum of current can be measured through a measurement of microwave response of a superconducting resonant circuit shunted by a series array of Josephson…
The Axion Dark Matter eXperiment (ADMX) was designed to detect ultra-weakly interacting relic axion particles by searching for their conversion to microwave photons in a resonant cavity positioned in a strong magnetic field. Given the…
We demonstrate simultaneous measurements of DC transport properties and flux noise of a hybrid superconducting magnetometer based on the proximity effect (superconducting quantum interference proximity transistor, SQUIPT). The noise is…
To better understand the working principles of Superconducting Quantum Interference Device (SQUID) direct readout schemes, which work in different bias and amplifier modes with different internal feedback schemes, we present the complete…
The magnetic field noise in superconducting quantum interference devices (SQUIDs) used for biomagnetic research such as magnetoencephalography or ultra-low-field nuclear magnetic resonance is usually limited by instrumental dewar noise. We…
The readout system with a high multiplexing ratio has become a bottleneck limiting the application of large-scale Transition Edge Sensor (TES) detector arrays. In recent years, the microwave superconducting quantum interference device…
We present a cryogenic microwave noise source with a characteristic impedance of 50 $\Omega$, which can be installed in a coaxial line of a cryostat. The bath temperature of the noise source is continuously variable between 0.1 K and 5 K…
To reduce the level of thermally generated electrical noise transmitted to superconducting quantum devices operating at 20 mK, we have developed thin-film microwave power attenuators operating from 1 to 10 GHz. The 20 dB and 30 dB…
A flux qubit readout scheme involving a dispersive technique coupled to a microstrip squid amplifier has been tested experimentally. Thanks to the almost quantum limited noise of this amplifier at low temperature, this readout device is…
We suggest SQUID amplifier configuration intended for millikelvin refrigerators where cooling power is limited and hence high power efficiency is desirable. The configuration operates the SQUIDs in class-AB rather than the traditional…
We present a microwave quantum refrigeration principle based on the Josephson effect. When a superconducting quantum interference device (SQUID) is pierced by a time-dependent magnetic flux, it induces changes in the macroscopic quantum…
Josephson parametric amplifiers (JPA) are promising devices for applications in circuit quantum electrodynamics (QED) and for studies on propagating quantum microwaves because of their good noise performance. In this work, we present a…
Scanning Superconducting Quantum Interference Device (SQUID) Susceptometry simultaneously images the local magnetic fields and susceptibilities above a sample with sub-micron spatial resolution. Further development of this technique…
We report on the development of a new family of SQUID current sensors based on sub-micron cross-type Josephson tunnel junctions. Their low total junction capacitance permit high usable voltage swings of more than 100 {\mu}V and exceptional…
The intrinsic flux noise observed in superconducting quantum interference devices (SQUIDs) is thought to be due to the fluctuation of electron spin impurities, but the frequency and temperature dependence observed in experiments do not…
Low-noise amplifiers are of great importance in the field of quantum technologies. We study a thermally driven parametric amplifier based on a superconductor-insulator-graphene-insulator-superconductor (SIGIS) junction coupled to a…
We present transport measurements of unshunted dc superconducting quantum interference devices (SQUIDs) consisting of 30 nm wide aluminum nanobridges of varying length L contacted with two and three dimensional banks. 3D nanobridge SQUIDs…
We present a resistance bridge which uses a SQUID to measure the shot noise in low impedance samples. The experimental requirements are high DC bias currents (typically 10mA) together with high AC sensitivity (pA/VHz). This system is used…