相关论文: Temperature dependent characterization of optical …
We report on high-temperature sensing measurements using a tubular-lattice hollow-core photonic crystal fiber displaying a microstructure formed of eight 2.4 um-thick cladding tubes. The larger thickness of our fiber's cladding tubes…
Distributed temperature sensors (DTS) measure temperatures by means of optical fibers. Those optoelectronic devices provide a continuous profile of the temperature distribution along the cable. Initiated in the 1980s, DTS systems have…
This paper discusses the experiences gained from designing, deploying and maintaining low-power wireless sensor networks in three geothermally active remote locations in Iceland. The purpose of deploying the network was to collect soil…
Controlling polarisation directly at low temperature is crucial for development of optical spectroscopy techniques at sub-Kelvin temperatures, for example, in a hybrid scheme where light is fed into and collected in the cryostat by fibres…
Three different types of Er doped photosensitive fibers, germanium/erbium (Ge/Er) fiber, tin/germanium/erbium fiber (Sn/Er) and antimony/germanium/erbium fiber (Sb/Er) have been manufactured and studied for use in optical sensor systems.…
ABSTRACT: Temperature monitoring is extremely im-portant during thermotherapy. Fiber-optic temperature sensors are preferred because of their flexibility and im-munity to electromagnetic interference. Although many types of fiber-optic…
In this paper, we report on a multicore fiber-based (MCF) temperature sensor that operates in a wide thermal range and that is robustly packaged to withstand harsh environments. To develop the sensor, the fundamentals concerning the effect…
This study explores the efficacy of thermal splicing conditions between silica and zirconium-fluoride fibers, focusing on achieving mechanical strength between the two fibers. A comprehensive characterization of the thermal profile in the…
Optical fibres constitute an exceptional sensing platform. However, standard fibres present an inherent sensing challenge: they confine light by design to an inner core. Consequently, nearly all distributed fibre sensors are restricted to…
In this chapter, we report on our experience with domestic flexible electric energy demand based on a regular commercial (HVAC)-based heating system in a house. Our focus is on investigating the predictability of the energy demand of the…
To understand the behaviour of rocks under changing load or temperature conditions, the determination of physical parameters like pore pressure or temperature within the pore space is essential. Within this study, the implementation of a…
A new method based on negative thermal expansion material coating is proposed to realize temperature insensitive fiber coupler. By coating a layer of modified epoxy resin with a negative thermal expansion coefficient onto the coupling…
Results of optical frequency transfer over a carrier-grade dense-wavelength-division-multiplexing (DWDM) optical fibre network are presented. The relation between soil temperature changes on a buried optical fibre and frequency changes of…
The measurement and control of the temperature in microscopic systems, which are increasingly required in diverse applications, are fundamentally important. Yet, the measurement of the three-dimensional (3D) temperature distribution in…
A polarization-sensitive optical coherence tomography (PS-OCT) system is able to not only show the structure of samples through the analysis of backscattered light, but is also capable of determining their polarimetric properties. This is…
Besides the lot of advantages offered by the 3D stacking of devices in an integrated circuit there is a chance of device damage due to rise in peak temperature value. Hence, in order to make use of all the potential benefits of the vertical…
In recent years there has been considerable interest in developing photonic temperature sensors such as the Fiber Bragg gratings (FBG) as an alternative to resistance thermometry. In this study we examine the thermal response of FBGs over…
We present measurements of the low temperature thermal conductivity for materials useful in the construction of cryogenic supports for scientific instrumentation and in the fabrication of flat flexible cryogenic cabling. The materials we…
The temperature distribution inside a double-cladding optical fiber laser or amplifier is examined in detail. Traditionally, the quantum defect in the core is taken to be the main source of heating in an active optical fiber. However,…
Sapphire optical fiber shows great promise for remote sensing in extreme environments approaching 2000 degC, by using laser-processing to form a single-mode waveguide within it. However, for practical application, longer devices with high…