相关论文: Actively stabilized wavelength-insensitive carrier…
We investigate the effect of phase modulation of laser beams on the coherent and incoherent non-linear signals arising from the interaction of femtosecond pulses with matter. We observe that two collinear beams, whose phases are modulated…
The repetition rate stabilization of an optical frequency comb based on diode-pumped solid-state laser technology is demonstrated using an intra-cavity electro-optic modulator. The large feedback bandwidth of such modulators allows…
Fiber and bulk-optical isolators are widely used to stabilize laser cavities by preventing unwanted feedback. However, their integrated counterparts have been slow to be adopted. While several strategies for on-chip optical isolation have…
We reduce the intensity noise of laser light by using an electro-optic modulator and a cousto-optic modulator in series. The electro-optic modulator reduces noise at high frequency(10 kHz to 1 MHz), while the acousto-optic modulator sets…
Many precision laser applications require active frequency stabilization. However, such stabilization loops operate by pushing noise to frequencies outside their bandwidth, leading to large "servo bumps" that can have deleterious effects…
We control the relative coupling strength of carrier and first order motional sideband interactions of a trapped ion by placing it in a resonant optical standing wave. Our configuration uses the surface of a microfabricated chip trap as a…
Laser intensity noise limits performance in quantum sensing, metrology, and computing. Existing stabilization methods face a trade-off between bandwidth and complexity: electronic feedback loops are speed-limited, while optical resonators…
The distribution of ultra-narrow linewidth laser radiation is an integral part of many challenging metrological applications. Changes in the optical pathlength induced by environmental disturbances compromise the stability and accuracy of…
In this theoretical study, modulation techniques are developed to support the Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) mission. A CW lidar system using sine waves modulated by ML pseudo random noise codes is…
We present a technique for coherence transfer of laser light through a branching fiber link, where the optical phase noise induced by environmental perturbations via the fiber link is passively compensated by remote users without the…
We demonstrate a Raman laser system based on phase modulation technology and phase feedback control. The two laser beams with frequency difference of 6.835 GHz are modulated using electro-optic and acousto-optic modulators, respectively.…
We report on a device to electronically stabilize the optical injection lock of a semiconductor diode laser. Our technique uses as discriminator the peak height of the laser's transmission signal on a scanning Fabry-Perot cavity and feeds…
An absorption mechanism based on second-harmonic generation (ASHG) is successfully implemented as a buffer reservoir in a solid-state Er,Yb:Glass laser emitting at telecom wavelength. We show that a slight ASHG rate conversion of 0.016%…
A reduction of more than 20 dB of the intensity noise at the anti-phase relaxation oscillation frequency is experimentally demonstrated in a two-polarization dual-frequency solid-state laser without any optical or electronic feedback loop.…
In the optical pumping systems based on the pump-probe arrangement, the spin polarization of the atoms is generally monitored utilizing the probe laser beam, in which way an extra perturbation must be introduced and thus affects the normal…
A phase modulated RF current source is applied to an injection locked diode laser operating at $780\unit{nm}$. This produces tunable phase modulated sidebands of the laser suitable for stabilizing the length of an optical transfer cavity…
Injection locking of diode lasers is commonly used to amplify low power laser light, but is extremely sensitive to perturbations in the laser current and temperature. To counter such perturbations, active stabilization is often applied to…
We unveil a powerful method for stabilization of laser injection locking based on sensing variations in the output beam ellipticity of an optically seeded laser. The effect arises due to an interference between the seeding beam and the…
We consider the phase stability of a local oscillator (or laser) locked to a cavity QED system comprised of atoms with an ultra-narrow optical transition. The atoms are cooled to millikelvin temperatures and then released into the optical…
Proper operation of electro-optic I/Q modulators rely on precise adjustment and control of the relative phase biases between the modulator's internal interferometer arms. We present an all-analog phase bias locking scheme where error…