相关论文: Signal propagation and spark mitigation in resisti…

An upgrade of the near detector of the T2K long baseline neutrino oscillation experiment is currently being conducted. This upgrade will include two new Time Projection Chambers, each equipped with 16 charge readout resistive Micromegas…

Short planar glow discharges coupled to a resistive layer exhibit a wealth of spontaneous spatio-temporal patterns. Several authors have suggested effective reaction-diffusion-models to explore similarities with other pattern forming…

This paper discusses the challenges faced by cyber-physical microgrids (MGs) due to the inclusion of information and communication technologies in their already complex, multi-layered systems. The work identifies a research gap in modeling…

A highly sensitive refractive index sensor based on grating-assisted strip waveguide directional coupler is proposed. The sensor is designed using two coupled asymmetric strip waveguides with a top-loaded grating structure in one of the…

We describe the first tests with a new proportional gas detector. Its geometry consists in slits opened in a copper metallized kapton foil with 30 micron anode strips suspended in these openings. In this way the multiplication process is…

A new prototype of large area Multi-gap Resistive Plate Chamber (MRPC) with long readout strips was built. This Long-strip Multi-gap Resistive Plate Chamber (LMRPC) is double stacked and has ten 250 $\mu$m-thick gas gaps. Signals are read…

In recent years important progress in micropattern gaseous detectors has been achieved in the use of resistive material to build compact spark-protected devices. The novel idea presented here consists of the polarisation of WELL structures…

In the last decade, several new imaging gaseous detectors, called micro-pattern gaseous detectors, have been conceived and rapidly developed. In this paper, the most popular designs of these detectors and their applications to high energy…

With the growing share of renewable energy sources, the uncertainty in power supply is increasing. In addition to the inherent fluctuations in the renewables, this is due to the threat of deliberate malicious attacks, which may become more…

The investigations have been conducted on the involved design parameters to analyze the behavior of the microwave displacement sensor output characteristics. To implement this, a dielectric resonator loaded to a reflection mode operated…

Current distribution for a thin superconducting strip shielded by two ideally conducting plains has been calculated. It is shown that at microwave requencies the current density has maximum over the center of the strip in contrast to the dc…

Currently a revolution is taking place in the development of gaseous detectors of photons and particles. Parallel plate-type and wire-type detectors which dominated for years in high energy and space flight experiments are now being…

The dominance of distributed energy resources in microgrids and the associated weather dependency require flexible protection. They include devices capable of adapting their protective settings as a reaction to (potential) changes in system…

Simple estimations show that the thermoelectric readout in graphene radiation detectors can be extremely effective even for graphene with modest charge-carrier mobility ~1000 cm^2/(Vs). The detector responsivity depends mostly on the…

The resonant transmission of two near-field coupled, cascaded band-pass filters, based on metallic stripe or patch gratings, is analysed. The response, in terms both of maximum efficiency and light rejection out of the resonance, overpasses…

This work is proposing and exploring the use of multichannel readout electronics, already used in quality assurance for gain uniformity studies, to measure the uniformity of the induction gap in GEM based detectors. The measurement will…

We study the position sensitivity of radial zigzag strips intended to read out large GEM detectors for tracking at future experiments. Zigzag strips can cover a readout area with fewer strips than regular straight strips while maintaining…

In this work we describe a parallel geometry gaseous detector constituted by a thin (0.6 mm) amplifying gap preceded by a drift region. The gap is delimited by a metal plate and by a wire mesh. The detector can count up to a rate of 10^7…

This paper investigates the propagation characteristics of circular waveguides whose interior surface is coated with a thin metamaterial liner possessing dispersive, negative, and near-zero permittivity. A field analysis of this system…

Micro-Pattern Gas Detectors (MPGDs) represent a category of gaseous ionization detectors that utilize microelectronics. They feature a remarkably small distance between the high potential difference anode and cathode electrodes and are…