相关论文: Internal friction study of dislocation dynamics in…
An analysis of the processes of plastic deformation and acoustic relaxation in a high-entropy alloy Al$_{0.5}$CoCrCuFeNi was carried out. The following have been established: dominant dislocation defects; types of barriers that prevent the…
Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and…
In this work, molecular dynamics (MD) simulations were used to investigate elementary dislocation properties in a Co-free high entropy (HEA) model alloy ($Cr_{15}Fe_{46}Mn_{17}Ni_{22}$ at. %) in comparison with a model alloy representative…
The contribution to the low frequency internal friction and the thermal conductivity due to optically vibrating edge dislocation dipoles is calculated within the modified Granato-Lucke string model. The results are compared with the recent…
The search for effective methods to fabricate bulk single-phase quasicrystalline Al-Cu-Fe alloys is currently an important task. Crucial to solving this problem is to understand mechanisms of phase formation in this system. Here we study…
Using large-scale atomistic simulations, dislocation mechanics in the presence of linear complexions are investigated in an Fe-Ni alloy, where the complexions appear as nanoparticle arrays along edge dislocation lines. When mechanical shear…
The dynamics and thermodynamics of dislocated crystals are studied within the framework of the nonlinear theory of elastic and plastic deformations.
This thesis is a theoretical study of thermodynamic, point-defect formation and diffusion properties in Fe-Ni alloys with a focus on the magnetochemical effects. The results are derived from density functional theory (DFT) calculations and…
Advanced g-TiAl based intermetallics Mo-bearing have been developed to obtain the fine-grained microstructure required for superplastic deformation to be used during further processing. In the present work we have studied an alloy of…
Fe-Cr binary alloys serve as simplified model systems to study irradiation damage relevant to fusion structural materials. Here, Fe-3%Cr and Fe-5%Cr samples were irradiated with 4 MeV Fe ions under a dose rate of 4x10^5 dpa/s across a…
In this work, the evolution of nanomechanical properties was studied systematically as a function of temperature, chemical, and microstructural complexity of different Fe-based alloys. Experiments were performed at different temperatures…
We show by acoustic emission analysis that FeAlCrMo complex-concentrated alloy (CCA) exhibits signatures of self-organization of deformation processes during both microplasticity and serrated flow (dynamic strain aging). Due to complex…
The universal generalising approach for non-isothermal behaviour of different alloys has been provided together with the novel deformation modelling. Strong correlation between the model approach and experimental results is shown that…
The statistical-thermodynamic dislocation theory developed in previous papers is used here in an analysis of high-temperature deformation of aluminum and steel. Using physics-based parameters that we expect theoretically to be independent…
In this work we present a molecular dynamics simulation of a FFM experiment. The tip-sample interaction is studied by varying the normal force in the tip and the temperature of the surface. The friction force, cA, at zero load and the…
Nanoindentation is a powerful tool capable of providing fundamental insights of material elastic and plastic response at the nanoscale. Alloys at nanoscale are particularly interesting as the local heterogeneity and deformation mechanism…
We conduct dislocation dynamics (DD) simulations of Fe periodic single crystals under tensile load at several high strain rates and temperatures. The simulations are enabled by the recent development of temperature-dependent dislocation…
Fracture material is seriously problem in daily life, and it has connection with mechanical properties itself. The mechanical properties is belief depend on dislocation movement and crack propagation in the crystal. Information about this…
In small-scale metallic systems, collective dislocation activity has been correlated with size effects in strength and with a step-like plastic response under uniaxial compression and tension. Yielding and plastic flow in these samples is…
The thermodynamic dislocation theory developed for non-uniform plastic deformations is used here in an analysis of a bar subjected to torsion. Employing a small set of physics-based parameters, which we expect to be approximately…