相关论文: Decomposition process in a FeAuPd alloy nanostruct…
The effect of composition on microstructure both at the length scale of the secondary dendrite arm spacing and nano-sized dispersoids during homogenization of Al-Zn-Cu-Mg-Zr alloys has been studied. A comprehensive model that can predict…
A multi-phase field model is employed to study the microstructural evolution of an alloy undergoing liquid dealloying. The model proposed extends upon the original approach of Geslin et al. to consider dealloying in the presence of grain…
This work demonstrates the development of a strong and ductile medium entropy alloy by employing conventional alloying and thermomechanical processing to induce partial recrystallization (PR) and precipitation strengthening in the…
In this study, severe plastic deformation by high pressure torsion is used as a fabrication method for nanocrystalline magnetic CuCo alloys in bulk quantities. By subsequent isothermal annealing, phase separation of the supersaturated solid…
We consider the process of precipitation in binary alloys in the presence of mechanical deformation. It is commonly observed that mechanical deformation prior to or during precipitation leads to microstructure with excess defects, which…
It is far well accepted that the morphology of nanoparticles and nanoalloys is of paramount importance to understand their properties. Furthemore, the morphology depends on the growth mechanism with coalescence generally accepted as one the…
A series on nanocrystalline Fe100-xCrx alloys prepared by mechanical alloying was investigated with X-ray diffraction (XRD), scanning electron microscopy (SEM) and M\"ossbauer spectroscopy (MS) techniques. XRD and SEM were used to…
We report the studies of ultrafast electron nanocrystallography on size-selected Au nanoparticles (2-20 nm) supported on a molecular interface. Reversible surface melting, melting, and recrystallization were investigated with dynamical…
The irradiation with the 10 ns pulsed infrared Nd:YAG laser was applied to transform FePdCu multilayers into chemically ordered L10 phase. The X-ray diffraction methods (Theta/2Theta scan, psi-scan, omega-scan) were used to trace the…
Microcompression testing is used to probe the uniaxial stress-strain response of a nanocrystalline alloy, with an emphasis on exploring how grain size and grain boundary relaxation state impact the complete flow curve and failure behavior.…
Rapid solidification leads to unique microstructural features, where a less studied topic is the formation of various crystalline defects, including high dislocation densities, as well as gradients and splitting of the crystalline…
The details of phase separation of a Ni-6.5Al-9.9Mo aged at 978 K for aging times ranging from 0.125 to 1024 h are investigated by atom-probe tomography and lattice-kinetic Monte Carlo (LKMC) simulations. On the basis of the temporal…
Solid solution effects on the strength of the finest nanocrystalline grain sizes are studied with molecular dynamics simulations of different Cu-based alloys. We find evidence of both solid solution strengthening and softening, with trends…
Micro-alloying was performed using additions of Co and Fe to monolithic Pd40Ni40P20 bulk metallic glass to study selectively the influence on the plastic behavior in uniaxial compression and three-point bending tests. The corresponding…
Applying focused ion beam (FIB) nanotomography and Rutherford backscattering spectroscopy (RBS) to dealloyed platinum-aluminum thin films an in-depth analysis of the dominating physical mechanisms of porosity formation during the dealloying…
Homogenization is one of the critical stages in the post-heat treatment of additive manufacturing (AM) component to achieve uniform microstructure. During homogenization, grain coarsening could be an issue to reserve strength, which…
The diffusion-controlled growth and microstructural evolution at the interface of aluminide coatings and different substrates such as Ni-base superalloys and steel are reviewed. Quantitative diffusion analysis indicates that the diffusion…
Uniform macroscopic samples of nanoporous metal with high deformability have so far been limited to precious metals such as Au, Pd and Pt. Here we propose nanoporous Copper-Nickel (npCN) as a nanoporous base metal that can be made with mm…
Investigation of crystallization in an 5BDSR amorphous alloy by system Fe-Cu-Nb-Si-B under the influence of an incoherent optical radiation generated by gas discharge flash-lamp using X-ray diffraction scattering. It is shown that depending…
For its potential as a catalyst, nanoporous gold (NPG) prepared through dealloying of bulk Ag-Au alloys has been extensively investigated. NPG thin films can offer ease of handling, better tunability of the chemistry and microstructure of…