相关论文: Design And Fabrication of High Numerical Aperture …

The numerical aperture (NA) of a lens determines its ability to focus light and its resolving capability. Having a large NA is a very desirable quality for applications requiring small light-matter interaction volumes or large angular…

This paper presents a simple and effective method to fabricate a polydimethyl-siloxane (PDMS) microlens array with a high fill factor, which utilizes the UV proximity printing and photoresist replication methods. The concave microlens array…

We demonstrate a high-NA (0.88), ultra-low-f-number (f/0.2714), multi-wavelength (480nm, 550nm and 650nm) multilevel diffractive MicroLens Array (MLA) using inverse design. Each microlens in the array is close-packed with diameter of 70…

Flat lenses enable thinner, lighter, and simpler imaging systems. However, large-area and high-NA flat lenses have been elusive due to computational and fabrication challenges. Here, we applied inverse design to create a multi-level…

Future far-infrared astrophysics observatories will require focal plane arrays containing thousands of ultra-sensitive, superconducting detectors, each of which needs to be optically coupled to the telescope. At longer wavelengths, many…

We report subwavelength-thick, polarization insensitive micro-lenses operating at telecom wavelength with focal spots as small as 0.57 wavelengths and measured focusing efficiency up to 82%. The lens design is based on high contrast…

A simple and effective method to fabricate a high fill-factor triangular microlens array using the proximity printing in lithography process is reported. The technology utilizes the UV proximity printing by controlling a printing gap…

We describe our work towards the manufacture of micro-optical arrays using freeform diamond machining techniques. Simulations have been done to show the feasibility of manufacturing micro-lens arrays using the slow-tool servo method. Using…

High precision, high numerical aperture mirrors are desirable for mediating strong atom-light coupling in quantum optics applications and can also serve as important reference surfaces for optical metrology. In this work we demonstrate the…

A metasurface lens (meta-lens) bends light using nanostructures on a flat surface. Macroscopic meta-lenses (mm- to cm-scale diameter) have been quite difficult to simulate and optimize, due to the large area, the lack of periodicity, and…

This paper presents a simple method to fabricate micro-ball lens and its array. The key technology is to use the hydrophobic characteristics of polyterafluoroethylene (PTFE) substrate. High contact angle between melted photoresist pattern…

A microwave lens with highly reduced reflectance, as compared to conventional dielectric lenses, is proposed. The lens is based on two-dimensional or three-dimensional transmission-line networks that can be designed to have an effective…

Sub-100 nm polymeric spherical plano-convex nano-lens arrays are fabricated using short electron beam exposures to selectively modify the ultrathin (< 30 nm) polymer films, followed by their intensified self-organized dewetting under an…

We report on fabricating high-fill-factor plano-convex spherical and square micro-lens arrays on fused silica glass surface using CO2 laser assisted reshaping technique. Initially, periodic micro-pillars have been encoded on the glass…

We introduce our new program to develop two-dimensional MEMS arrays of individually addressable micro-mirrors (''Micro-Mirror Devices'', MMDs) specifically optimized for astronomy, multi-slit spectroscopy in particular. After reviewing the…

Optical components, such as lenses, have traditionally been made in the bulk form by shaping glass or other transparent materials. Recent advances in metasurfaces provide a new basis for recasting optical components into thin, planar…

A liquid crystal (LC) lens array based on double-layer composite electrodes, characterized by a large aperture, short focal length, and low operating voltage is demonstrated. The lens array consists of an LC layer, a top common electrode, a…

Flat optics consisting of nanostructures of high-refractive-index materials produce lenses with thin form factors that tend to operate only at specific wavelengths. Recent attempts to achieve achromatic lenses uncover a trade-off between…

We demonstrate a CMOS-compatible silicon-rich nitride metalens array for visible microscopy at 660 nm. Three co-planar elements provide numerical apertures of 0.54, 0.92, and 0.97, enabling within-sample NA benchmarking without objective…

To improve the light extraction efficiency of organic light emitting diodes (OLEDs), we developed a novel substrate, i.e., a metamaterial based flat Moire micro-lens array formed using double nanoimprint, termed Mlens-array, consisting of a…