相关论文: Development of a peristaltic micropump for bio-med…
This paper is to describe a design and fabrication method for a valve-less peristaltic micro-pump. The valve-less peristaltic micro-pump with three membrane chambers in a serial is actuated by three piezoelectric (PZT) actuators. With the…
Micropumps are one of the most important parts of a microfluidic system. In particular, for biomedical applications such as Lab-on-Chip systems, micropumps are used to transport and manipulate test fluids in a controlled manner. In this…
There is an emerging class of microfluidic bioreactors which possess long-term, closed circuit perfusion under sterile conditions with in vivo-like flow parameters. Integrated into microfluidics, peristaltic-like pneumatically actuated…
In this study, a new type of thin, compact, and light weighed diaphragm micro-pump has been successfully developed to actuate the liquid by the vibration of a diaphragm. The micro-diaphragm pump with two valves is fabricated in an aluminum…
This paper presents an integrated multiphysics simulation approach of piezoelectric micropumps. Micropumps and micro blowers are essential devices in various cutting-edge industries like laboratory equipment, medical devices, and fuel…
Pumping fluids without an aid of an external power source are desirable in a number of applications ranging from a cooling of microelectronic circuits to Micro Total Analysis Systems (micro-TAS). Although, several microfluidic pumps exist,…
To facilitate the use and portability of Lab on a chip technology, it is desirable to avoid the use of bulky electronic systems for flow control. Developed self-powered microsystems typically move only small volumes of fluid performing up…
A design for a pump is suggested which is based on well-known peristaltic pumps. In order to simply describe the operation of the proposed pump, an innovative interpretation of low Reynolds number swimmers is presented and thereafter a…
We focused on polydimethylsiloxane (PDMS) as a substrate for replication, micropatterning, and construction of biologically active surfaces. The novelty of this study is based on the combina-tion of argon plasma exposure of micropatterned…
The integration of a PDMS membrane within orthogonally placed PMMA microfluidic channels enables the pneumatic actuation of valves within bonded PMMA-PDMS-PMMA multilayer devices. Here, surface functionalization of PMMA substrates via acid…
Encapsulation of chemicals using polymer membranes enables to control their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the…
A microfluidic device is constructed from PDMS with a single channel having a short section that is a thin flexible membrane, in order to investigate the complex fluid-structure interaction that arises between a flowing fluid and a…
Ultrasound-vaporizable microdroplets can be exploited for targeted drug delivery. However, it requires customized microfluidic techniques able to produce monodisperse, capillary-sized and biocompatible multiple emulsions. Recent development…
We present an experimental protocol for the fabrication and characterization of scalable microarchitected elastic waveguides. Using silicon microfabrication techniques, we develop free-standing 2D truss-based architected waveguides with a…
Pumping fluids is fundamental to a wide range of industrial, environmental, and biomedical applications. Among various pumping mechanisms, peristaltic pumps enable efficient and safe fluid transport by deforming an elastic tube without…
Low Reynolds number flow near a poroelastic interface can be found across scales in biological and engineered systems. We develop a 2D model of peristaltic flow confined under a poroelastic solid. In this geometry, the lower boundary is an…
Air-permeable porous media hosts air within their pores. Upon removal from the interior of the material, these porous media have the tendency to reabsorb air from the surrounding, acting as a suction pump. Therefore, the technique used to…
The elasticity of PDMS has played a central role in advancing important microfluidic technologies, ranging from early valves to sophisticated organ-on-a-chip systems. However, most deformable microfluidic devices are based on geometries…
Lack of fast and strong actuators to drive microsystems is well recognized. Electrochemical actuators are considered attractive for many applications but they have long response time (minutes) due to slow gas termination. Here an…
In this investigation, the numerical simulation of electrohydrodynamic (EHD) ion-drag micropumps with micropillar electrode geometries have been performed. The effect of micropillar height and electrode spacing on the performance of the…