相关论文: Power control algorithms for CDMA networks based o…
A simple feedback control algorithm is presented for distributed beamforming in a wireless network. A network of wireless sensors that seek to cooperatively transmit a common message signal to a Base Station (BS) is considered. In this…
We consider the problem of spectrum sharing in a cognitive radio system consisting of a primary user and a secondary user. The primary user and the secondary user work in a non-cooperative manner. Specifically, the primary user is assumed…
Substreams refer to the streams of each user in a system. Substream weighting, where the weights determine the prioritization order, can be important in multiple-input multiple-output interference channels. In this letter, a distributed…
Multiple-input multiple-output (MIMO) systems greatly increase the overall throughput of wireless systems since they are capable of transmitting multiple streams employing the same time-frequency resources. However, this gain requires an…
Various system tasks like interference coordination, handover decisions, admission control etc. in upcoming cellular networks require precise mid-term (spanning over a few seconds) performance models. Due to channel-dependent scheduling at…
Power allocation in spectrum sharing systems is challenging due to excessive interference that the secondary system could impose on the primary system. Therefore, an interference threshold constraint is considered to regulate the secondary…
This work presents joint interference suppression and power allocation algorithms for DS-CDMA networks with multiple hops and decode-and-forward (DF) protocols. A scheme for joint allocation of power levels across the relays subject to…
In a cell-free massive MIMO architecture a very large number of distributed access points simultaneously and jointly serves a much smaller number of mobile stations; a variant of the cell-free technique is the user-centric approach, wherein…
Uplink power control is an efficient scheme to mitigate pilot contamination in massive multiple-input multiple-output (MIMO) systems. In this work, we provide a comprehensive study on the effects of fractional power control (FPC) on the…
In wireless networks, the transmission rate of a link is determined by received signal strength, interference from simultaneous transmissions, and available coding-modulation schemes. Rate allocation is a key problem in wireless network…
Reed-Muller codes are studied for peak power control in multicarrier code-division multiple access (MC-CDMA) communication systems. In a coded MC-CDMA system, the information data multiplexed from users is encoded by a Reed-Muller subcode…
In this paper, wireless video transmission to multiple users under total transmission power and minimum required video quality constraints is studied. In order to provide the desired performance levels to the end-users in real-time video…
The Wyner model has been widely used to model and analyze cellular networks due to its simplicity and analytical tractability. Its key aspects include fixed user locations and the deterministic and homogeneous interference intensity. While…
Cell-free Massive MIMO is considered as a promising technology for satisfying the increasing number of users and high rate expectations in beyond-5G networks. The key idea is to let many distributed access points (APs) communicate with all…
We investigate power allocation for users in a spectrum underlay cognitive network. Our objective is to find a power control scheme that allocates transmit power for both primary and secondary users so that the overall network throughput is…
Large-scale distributed antenna systems with many access points (APs) that serve the users by coherent joint transmission is being considered for 5G-and-beyond networks. The technology is called Cell-free Massive MIMO and can provide a more…
Ubiquitous densification of wireless networks has brought up the issue of inter-and intra-cell interference. Interference significantly degrades network throughput and leads to unfair channel resource usage, especially in Wi-Fi networks,…
Cellular uplink analysis has typically been undertaken by either a simple approach that lumps all interference into a single deterministic or random parameter in a Wyner-type model, or via complex system level simulations that often do not…
Power packets are proposed as a transmission unit that can deliver power and information simultaneously. They are transferred using the store-and-forward method of power routers. A system that achieves power supply/demand in this manner is…
Transmit power control (TPC) is a key mechanism for managing interference, energy utilization, and connectivity in wireless systems. In this paper, we propose a simple low-complexity TPC algorithm based on the deep unfolding of the…