Related papers: Mechanical Dissipation in Silicon Flexures
Superconducting resonators used in millimeter-submillimeter astronomy would greatly benefit from deposited dielectrics with a small dielectric loss. We deposited hydrogenated amorphous silicon films using plasma-enhanced chemical vapor…
We report on low mechanical loss in a high-stress silicon nitride (Si_{3}N_{4}) membrane at temperatures below 100 mK. We isolate a membrane via a phononic shield formed within a supporting silicon frame, and measure the mechanical quality…
The next generation of gravitational-wave detectors, such as the Einstein Telescope, is designed to reduce noise in a wide band of frequencies compared to the current generation, through the use of new technologies. ETpathfinder, designed…
Next-generation gravitational wave observatories are expected to use cryogenically cooled, pendulum-suspended 200 kg test mass mirrors from a crystalline material such as crystalline silicon. During operation of the observatories, these…
High quality micro- and nano-mechanical resonators are widely used in sensing, communications and timing, and have future applications in quantum technologies and fundamental studies of quantum physics. Crystalline thin-films are…
We have performed thermal conductance measurements on individual single crystalline silicon suspended nanowires. The nanowires (130 nm thick and 200 nm wide) are fabricated by e-beam lithography and suspended between two separated pads on…
The low temperature properties of glass are distinct from those of crystals due to the presence of poorly understood low-energy excitations. The tunneling model proposes that these are atoms tunneling between nearby equilibria, forming…
Spatiotemporal dynamics of electron-hole pairs locally excited in a silicon-on-insulator structure by indirect interband absorption are studied by measuring differential transmission caused by free-carrier absorption of a probe pulse tuned…
The temperature dependence of dark conductivity at low temperatures (300-15 K) was studied on a wide microstructural range of well-characterized highly crystallized single phase undoped microcrystalline silicon samples. Our study reveals…
We have measured the optical and mechanical loss of commercial silicon nitride membranes. We find that 50 nm-thick, 1 mm^2 membranes have mechanical Q > 10^6 at 293 K, and Q > 10^7 at 300 mK, well above what has been observed in devices…
A molecular dynamics simulation of sublimation of silicene and silicon films of different thikness is performed. It is shown that thiner films sublimate at lower temperatures. The sublimation temperature comes to a saturated value of…
Ultrathin microscale resistive thermometers are of key value to many applications. Here we have fabricated a laser machined 50 ${\mu}$m wide and 50 nm thick serpentine Pt thin film sensor capable of sensing temperatures up to 650 ${^\circ}$…
A mechanical quality factor of $1.1 \times 10^{7}$ was obtained for the 199 Hz bending vibrational mode in a monocrystalline sapphire fiber at 6 K. Consequently, we confirm that pendulum thermal noise of cryogenic mirrors used for…
Electron excitations at silicon and 3C-SiC surfaces caused by an intense femtosecond laser pulse can be calculated by solving the time-dependent density functional theory and the Maxwell's equation simultaneously. The energy absorption,…
We report on the cryogenic properties of a low-contraction silicon-aluminum composite, namely Japan Fine Ceramics SA001, to use as a packaging structure for cryogenic silicon devices. SA001 is a silicon--aluminum composite material (75%…
High-stress silicon nitride nanostrings are a promising system for sensing applications because of their ultra-high mechanical quality factors (Qs). By performing thermomechanical calibration across multiple vibrational modes, we are able…
We have measured the thermal properties of suspended membranes from 10 K to 300 K for two amplitudes of internal stress (about 0.1 GPa and 1 GPa) and for two different thicknesses (50 nm and 100 nm). The use of the original 3 \omega…
The applications of nanomechanical resonators range from biomolecule mass sensing to hybrid quantum interfaces. Their performance is often limited by internal material damping, which can be greatly reduced by using crystalline materials.…
Low mechanical loss materials are needed to further decrease thermal noise in upcoming gravitational wave detectors. We present an analysis of the contribution of Akhieser and thermoelastic damping on the experimental results of resonant…
We demonstrate electron cooling in silicon using platinum silicide as a superconductor contact to selectively remove the highest energy electrons. The superconducting critical temperature of bulk PtSi is reduced from around 1 K to 0.79 K…